DS8000 Service Documentation Version 7.5

MAP1330 SRC BE9Cxxxx

This MAP provides the definitions of the code update SRCs.

MAP1330 Section-1

Procedure

To determine the definition of your SRC (BE9Cwxyz), see the individual definition tables below for your values of w, x, and yz. Repairs of code update process errors must begin with a serviceable event. The definitions listed here are only for reference purposes.

Note: If your SRC is not listed in the combination of wxyz values below, check the serviceable event, the latest version of the service information center on the Product Engineering web site or contact your next level of support.

Table 1. BE9Cwxyz
w	Definition
0	Acquisition of code packages from CD or network being to the HMC library (MAP4A10 Code update error during acquire)
1	Verification that HMC and storage facility are in the proper states (MAP4AC0 Code update pre-verify check)
2	HMC install and activate process (MAP4A20 Error during update of HMC code)
3	Distribution of code packages from HMC library to the storage facility
4	Update managed system firmware
5	Update AIX on managed system LPAR
6	Update DS8000® LIC code on managed system LPAR
7	Update of host adapter card for managed system storage facility image (SFI)
8	Update of storage enclosure Fibre Channel interface cards
9	Update the RPC cards and primary power supplies (PPS)
A	Update the storage enclosure DDMs
E	Update control error
F	Unknown error

Table 2. BE9Cwxyz
x	Description
0	Setup code package
1	Transfer code package
2	Install code package
3	Reserved
4	Deactivate application
5	Deactivate target hardware
6	Install code to target hardware
7	Activate target hardware
8	Activate application
B	PreVerify error

Table 3. BE9Cwxyz
yz	Definition
00-3F	Reserved

40	Utility code update process suspended manually by service provider (MAP4A80 Code update utility process was manually suspended)
41	Utility code update process detected an error and automatically suspended (MAP4A90 Code update utility process was automatically suspended)
42-7F	Utility code update process errors (MAP4AA0 Code update utility errors that caused a suspend)

80-81	Acquire code package process errors or HMC code update process errors
82-BF	CCL errors that do not suspend the code update (MAP4A70 Concurrent code load update process completed but not all resources were updated)

C0	CCL code update process suspended manually by service provider (MAP4A30 CCL code update process was manually suspended)
C1	CCL code update process detected an error and automatically suspended (MAP4A40 Code update CCL process was automatically suspended)
C2-FD	CCL code update process errors (MAP4A50 CCL update errors that will result in code update being automatically suspended)

FE	HMC or communication error (MAP4A00 HMC failure with CCL code update or code update utility still active)
FF	Unknown problem (MAP4AB0 Unknown Code Update Error)