DS8000 Service Documentation Version 7.5

MAP6220 Reloading the management console with no backup data LIC bundle VRMF 64.2.`xxx`.`xxx` or later

Use this MAP to reinstall the Licensed Internal Code (LIC bundle VRMF 64.2.xxx.xxx or later) for the management console only when the restore HMC critical console data from the LPAR failed.

MAP6220 Section-1

Procedure

You should have been sent here from MAP6210 Restore HMC Critical Console Data from LPAR, LIC bundle VRMF 64.2.xxx.xxx or later. The attempt to restore the HMC critical console data failed at some point in the process. It is not known how much of the data was written before the failure being detected.
Go to MAP6200 Reloading the management console LIC bundle VRMF 64.2.xxx.xxx or later and reload the management console LIC bundle. When MAP6200 directs you to go to MAP6210 to attempt to restore the HMC critical console data, ignore that request and instead, return here and go to the next step.
Note: The restore critical console data process that failed in MAP6210 Restore HMC Critical Console Data from LPAR, LIC bundle VRMF 64.2.xxx.xxx or later may have left a partial or corrupted copy of the critical console data. You are reloading the management console LIC bundle to ensure that a clean copy of the code exists before going to the next steps to manually restore the critical console data.
Because the HMC critical console data cannot be restored from the LPAR, you will need to manually restore the settings.
1. Obtain a copy of the customer configuration worksheets.
2. Manually restore the settings. Refer to MAP6106 Restoring the HMC customer communication and network settings.
Contact your next level of support so they can remotely connect and do a procedure to rediscover storage facilities on this HMC.
Restart the management console:
1. From the navigation area, click HMC Management.
2. In the right work area, go to the Operations section and click Shut Down or Restart. The Shutdown or Restart window opens.
3. Select Restart HMC. Click OK.
When the management console pre-login screen appears, log on to the management console with user ID CE and password serv1cece.
Run the Discover Storage Facility task to refresh the resources displayed by the HMC screens:
1. From the navigation area, click Storage Facility Management.
2. From the bottom Task area, click Discover Storage Facility. You can click this option only once.
Was the Discover Storage Facility task successful?
- Yes, go to the next step.
- No, contact your next level of support.
Verify that each storage facility, storage facility image, partition, and CEC display correctly:
1. From the navigation area, click Storage Facility Management > Storage Facility > Server View.
Do the entries display correctly?
- Yes, go to the next step.
- No, contact your next level of support.
Ensure that the customer can access the DS8000® Storage Manager application and then exit this MAP.