DS8000 Service Documentation Version 6.3.3

MAP6730 Customer access to management console problem

The customer uses the DS8000® storage manager interface which is installed on a customer platform to access the DS8000 storage manager server on the management console (HMC).

MAP6730 Section-1

About this task

Procedure

Determine if this is a basic network problem. Can the customer "ping" the management console by hostname or TCP/IP address?
- Yes, continue at the next step.
- No, go to MAP6580 Customer Ethernet connection problem.
Ensure the ESSNI server on the management console is enabled.
1. From the navigation area, click HMC Management.
2. In the right work area, go to the Storage Server HMC Tasks section and click Start/Stop ESSNI.
Ensure ICAT is enabled.
1. From the navigation area, click HMC Management.
2. From the right work area, go to the Storage Server HMC Tasks section. Click Start/Stop DS Storage Manager.
Ask the customer to check that the following TCP/IP ports are open on the firewall to allow access for DSCLI and DS8000 Storage Manager: 1718, 1719, 1750, 1755 and 8451 - 8455.
Did you find a problem?
- Yes, this is the end of this procedure.
- No, contact your next level of support.