DS8000 Service Documentation Version 7.5

Opening the 208VDC bus bar gate

Procedure

  1. Remove the two screws  1  and pivot the 208VDC bus bar gate to the service position  2 , as shown in Figure 1.
    Figure 1. 208VDC bus bar gate service position
    Pivoting the 208V bus bar gate to service position
  2. Remove the tailgate frame bracket. Remove two screws  2  as shown in Figure 2. Loosen but do not remove the two top screws  1 . Slide the bracket out.
    Figure 2. Tailgate frame bracket
    Tailgate frame bracket view
  3. Continue with "Performing the power and safety checks".