DS8000 Service Documentation Version 7.5

TWRPLNR

The failing component is in the I/O Backplane assembly of an I/O enclosure.

Before you begin

Note: Storage complex repair actions must always be managed from the management console. To replace any FRUs identified in this procedure, use Storage Facility Management > storage facility > Exchange Parts. If the FRUs are listed in this or another Serviceable Event, select them from there.

Procedure

Replace the FRU listed below.

Table 1. Replacing the failing part
Unit	Failing part(s)	How to replace the failing part
I/O enclosure	I/O Backplane assembly	Refer to Exchanging parts.

What to do next

This ends the procedure.