DS8000 Service Documentation Version 7.5

FSPSP46

Some corrupt areas of flash or RAM have been detected on the service processor.

Before you begin

Note: Storage complex repair actions must always be managed from the management console. To replace any FRUs identified in this procedure, use Storage Facility Management > storage facility > Exchange Parts. If the FRUs are listed in this or another Serviceable Event, select them from there.

For Model 961 go to FSPSP46 Section-1 (Model 961).

For Model 941 and Model 951 go to FSPSP46 Section-2 (Models 941 and 951).

FSPSP46 Section-1 (Model 961)

Procedure

Replace the CEC enclosure system backplane at Un-P1.

Note: The CEC enclosure system backplane includes the embedded service processor function.

This ends the procedure for Model 961.

FSPSP46 Section-2 (Models 941 and 951)

Procedure

Replace the CEC enclosure service processor card at Un-P1-C11.
Perform a slow boot. See MAP4820 Performing a slow boot of a CEC enclosure.
This ends the procedure for Models 941 and 951.