DS8000 Service Documentation Version 7.5

FSPSP09

A problem has been detected with a memory DIMM, but it cannot be isolated to a specific memory DIMM.

Before you begin

Note: Storage complex repair actions must always be managed from the management console. To replace any FRUs identified in this procedure, use Storage Facility Management > storage facility > Exchange Parts. If the FRUs are listed in this or another Serviceable Event, select them from there.

Procedure

  1. Using the FRU called out after this procedure, replace ALL the memory DIMMs that reside on the same CEC enclosure system processor card.
  2. Perform a slow boot after replacing each memory DIMM. See MAP4820 Performing a slow boot of a CEC enclosure.

What to do next

This ends the procedure.