A Platform Licensed Internal Code error occurred. The IPL will not continue. Look for and correct errors with SRCs of the form B1xxxxxx in the Serviceable Event View. If there are no serviceable B1xxxxxx errors, or if correcting the errors did not correct this problem, reset the server firmware settings. Attention: Resetting the server firmware settings results in the loss of all of the partition data that is stored on the service processor. Before continuing with this operation, make sure that you manually record all settings that you need to preserve. To reset the server firmware settings, your authority level must be Administrator or Authorized service provider. On the ASMI Welcome pane, specify your user ID and password, and click Log In. In the navigation area, expand System Service Aids. Then select Factory Configuration. Select Reset server firmware settings and click Continue. The service processor will reboot after all settings have been reset. If that does not resolve the problem, replace the service processor.