Ensuring existing storage facility is ready for installation actions

There must be no unrepaired serviceable events prior to beginning the installation.

1. At the primary management console (MC 1), display and repair any open serviceable events on the existing storage facility that the new rack will be installed to:
   1. From the navigation area, click Service Management.
   2. In the right work area, click Manage Serviceable Events. A window opens and displays a list of selection criteria.
   3. You can use the default criteria or modify the criteria for your needs. Click OK. The Serviceable Event Overview window opens.
   4. Repair any serviceable events before you continue with the installation. Select a serviceable event. Click Selected > Repair. The guided process window opens.
2. At the primary management console (MC 1), view the storage facility status (end of call). If any of the system check results display as FAILED, view the details and refer to "MAP1100 View storage facility (end of call)." Before you continue the installation, all status fields should display as PASSED.
   1. From the navigation area, click Storage Facility Management > storage facility.
   2. From the bottom Task area, click Service Utilities > View Storage Facility State. A window displays the status (passed/failed) of 25 or more system checks. The following is an example.
      Figure 1. Window: View Storage Facility State

      
      Note: If the status for Large File Transfer (the tenth System Check Type status from the top) displays as FAILED, the remaining System Check Types below it cannot be displayed.
   3. To display further details, select a row and click Details.