DS8000 Service Documentation Version 6.3.3

Disconnecting Rack-2 I/O enclosure power

Use these procedures to disconnect the power input cables from each I/O enclosure for Rack-2.

Procedure

  1. You must do the following step to ensure the installation does not fail.
  2. At the bottom front of Rack-2, disconnect both power input cables from each I/O enclosure.
    Figure 1. Rack-2 I/O enclosures (front view)
    Rack-2, front view, I/O enclosures
    Figure 2. I/O enclosure power supply, power connector, and handle
    I/O enclosure power supply, power connector, and handle
  3. Go to the next section.