DS8000 Service Documentation Version 6.3.3
BE3xxxxx
This topic lists the BE3xxxxx system reference codes.
If the SRC listed in a serviceable event
is missing from the following table, ask your next level of support
for assistance.
Note: Next level, inform development of any SRCs not
defined in the table.
| System reference code | Description |
|---|---|
| BE30040F | Lost access to one half of a mirrored array |
| BE303200 | Loop Empty: Loop restored after darsterror. |
| BE303201 | Loop Empty: Loop restored after HOS reset. |
| BE303202 | Loop Empty: Loop partially restored after HOS reset. |
| BE303203 | Loop Empty: Loop restored after port disable/enable. |
| BE303204 | Loop Empty: Loop partially restored after port disable/enable. |
| BE303205 | Loop Empty: Loop restored after IC card reset. |
| BE303206 | Loop Empty: Loop partially restored after IC card reset. |
| BE303207 | Loop Empty: Bad FCIC. |
| BE303208 | Loop Empty: Utility was not able to recover loop. |
| BE304000 | The ISS adapter card has failed. |
| BE304010 | No SDRAM module detected or POST is unable to determine the SDRAM size. |
| BE304012 | A 256 MB SDRAM module has failed. |
| BE304060 | Device Adapter Power On Self Test detected compact flash failure. |
| BE304062 | Device Adapter flash memory card has reached its end of life. |
| BE304063 | The flash memory card is missing. |
| BE304064 | The Compact Flash card is downlevel, and needs to be upgraded in order to support RAID6. |
| BE304088 | Array is offline because there are insufficient drives in the array to maintain data availability. |
| BE30408A | DA failover failed. The array is offline as a missing adapter contains APU data that cannot be reconstructed locally. |
| BE30408C | An array member is missing and the opening adapter is not available. |
| BE304090 | Array offline, adapter has full APU. |
| BE304094 | Part of the array data might have been lost. |
| BE3040A0 | ISP failure. |
| BE3040A4 | The ISS adapter has detected a loop configuration that is not valid. |
| BE3040A8 | An array filter has detected a loop configuration that is not valid. |
| BE3040AC | Array is offline because some of its members are only connected to one adapter and some are connected to both adapters. |
| BE3040B0 | A RAID-10 array is offline because the primary/secondary half of the array is not present. |
| BE3040B2 | A RAID-10 array is offline because only one half of the array is present and that half contains an out-of-date copy of the data. |
| BE3040B4 | All the primary or all the secondary disks of a RAID-10 array are present, but the adapter is unknown to the array. |
| BE3040BC | The Invalid-strip-table is full. Because of failures on multiple member disk drives of an array, at least 448 blocks of data are not accessible. Other data on the array might still be readable. |
| BE3040BD | Parity Resync table full. Array has gone offline. |
| BE3040C0 | Array not available - multiple device failures. |
| BE3040C4 | A disk drive has caused an array building operation to fail. |
| BE3040C6 | A RAID-6 array is in the Critical state because 2 disk drives are not available to the array and a write command has been sent to that array. |
| BE3040C8 | An array is in the Degraded state because a DDM is not available to the array and a write command has been sent to that array. |
| BE3040CC | An array is in the Exposed state because a DDM is not available to the array. |
| BE3040CD | Device adapter internal error: DAHP disabled. |
| BE3040D0 | A different adapter has been detected on each loop. |
| BE3040D4 | Disused loop. |
| BE3040D8 | Disused FC chip. |
| BE3040D9 | The number of drive bias swaps has exceeded threshold. Device adapter firmware has placed the FCAL loop into service mode. |
| BE304100 | No hot spare disk drives are available for an array that is configured for hot spare disk drives. |
| BE304440 | There is one device that only has a single active port. |
| BE304442 | There are multiple devices that only have a single active port. |
| BE304460 | NVRAM failure. |
| BE304461 | Correctable NVRAM error threshold exceeded. |
| BE304471 | Control store single-bit error. |
| BE304472 | Data store single-bit error. |
| BE305000 | Unable to read or write to the PCI configuration space. |
| BE305004 | An ISS adapter or device driver protocol error has occurred. |
| BE305008 | The ISS adapter microcode has hung. |
| BE30500C | The ISS adapter card has failed. |
| BE305010 | An attempt was made to log an error against a pdisk that is not available to the using system. |
| BE305020 | Duplicate node number detected. |
| BE305D00 | Dump available on disk. |
| BE305F00 | The ISS adapter microcode has hung. |
| BE306002 | Device asynchronous health check. |
| BE306004 | Device has been reset due to invalid SCSI protocol. |
| BE306006 | The device adapter issued a reset to a device. |
| BE306008 | A device has a Failed status. |
| BE30600C | Device not initialized, unsupported device. |
| BE30600E | Disk drive is only visible on a single-active network and it is in use by another adapter. |
| BE306010 | A device port has been marked disused by the Device Adapter. |
| BE306011 | A device is present but it is not logged-in through either of its ports. |
| BE306012 | A device is present but Port Login was rejected on both ports. |
| BE306015 | Lost data frame (incorrect transfer length). |
| BE306016 | Lost non-data frame. |
| BE306017 | Device failed initialization. |
| BE306018 | Slow device threshold exceeded. |
| BE30CE24 | Device adapter showstop because of double bit error in L2 cache. |
| BE30CE79 | FATA disk drive utilization exceeds specification. Array throughput is now limited. Informational only, no repair necessary. |
| BE30CE80 | ER adapter showstop threshold exceeded, DA fenced was last path to data. |
| BE30CE81 | ER adapter showstop threshold exceeded, DA fenced was not last path to data. |
| BE30CE7A | FATA disk drive utilization now within specification. Array throughput no longer limited. Informational only, no repair necessary. |
| BE30CE95 | DA Datapath Error: Physical Address Check (true). |
| BE30CE96 | DA Datapath Error: Physical Address Check (false). |
| BE30CE97 | Bad LRC on DA Global Meta Data. |
| BE30CEB0 | Physical volume hardware error. |
| BE30CEB1 | Physical volume media error. |
| BE30CEB2 | Physical volume recovered media error. |
| BE30CEB3 | DASD detected software error. |
| BE30CEB4 | Device adapter hardware error. |
| BE30CEB5 | ISS software or firmware error. |
| BE30CEB6 | Adapter detected device error. |
| BE30CEB7 | Loop error. |
| BE30CEB8 | ISS degraded condition. |
| BE30CEB9 | ISS RAID array error. |
| BE30CEBA | ISS configuration error. |
| BE30CEBB | ISS flash memory error. |
| BE30CEBC | ISS event. |
| BE30CEBD | Unable to log an error against a pdisk. |
| BE30CEBE | Enclosure error. |
| BE30CEBF | Enclosure critical temperature. |
| BE30CEC0 | Enclosure temperature warning. |
| BE30CEC1 | Adapter detected device error event. |
| BE30CECE | Split network error detected. |
| System reference code | Description |
|---|---|
| BE310000 | DDM Reported Error: No Additional Sense Information |
| BE310001 | DDM format failed |
| BE310002 | DDM initsurf failed |
| BE310003 | DDM certify failed |
| BE310004 | SCSI sense data error: Beginning of partition/medium detected. |
| BE310005 | SCSI sense data error: End of data detected. |
| BE310006 | SCSI sense data error: I/O process terminated. |
| BE310011 | SCSI sense data error: Audio play operation in progress. |
| BE310012 | SCSI sense data error: Audio play operation paused. |
| BE310013 | SCSI sense data error: Audio play operation successfully completed. |
| BE310014 | SCSI sense data error: Audio play operation stopped due to error. |
| BE310015 | SCSI sense data error: No current audio status to return. |
| BE310016 | SCSI sense data error: Code/Qualifier 00/16. |
| BE310100 | SCSI sense data error: No Index/Logical Block Signal |
| BE310200 | SCSI sense data error: No Seek Complete |
| BE310300 | SCSI sense data error: Peripheral Device Write Fault |
| BE310301 | SCSI sense data error: No write current. |
| BE310302 | SCSI sense data error: Excessive write errors. |
| BE310400 | SCSI sense data error: Logical Unit Not Ready, Start motor failed |
| BE310401 | SCSI sense data error: Logical Unit Not Ready, Becoming Ready |
| BE310402 | SCSI sense data error: Logical Unit Not Ready, Initializing Command Required |
| BE310403 | SCSI sense data error: Logical Unit Not Ready, Manual Intervention Required |
| BE310404 | SCSI sense data error: Logical Unit Not Ready, Format in Progress |
| BE310408 | A drive has been removed from the array by RAID |
| BE310409 | SCSI sense data error: Self-test in progress |
| BE31040B | Array member marked Rejected |
| BE310411 | Member slow on read |
| BE310412 | Member slow on write |
| BE310483 | A hot spare drive has been rejected because a fault has been found with it. |
| BE310500 | SCSI sense data error: Logical unit does not respond to selection. |
| BE310600 | SCSI sense data error: Reference position found. |
| BE310700 | SCSI sense data error: Multiple peripheral devices selected. |
| BE310800 | SCSI sense data error: Logical Unit Communication Failure |
| BE310801 | SCSI sense data error: Logical Unit Communication Time-Out |
| BE310802 | SCSI sense data error: Logical Unit Communication Parity Error |
| BE310900 | SCSI sense data error: Track Following Error |
| BE310901 | SCSI sense data error: Servo Fault |
| BE310902 | SCSI sense data error: Focus servo failure. |
| BE310903 | SCSI sense data error: Spindle servo failure. |
| BE310904 | SCSI sense data error: Head Select Fault |
| BE310A00 | SCSI sense data error: Error Log Overflow |
| BE310B01 | SCSI sense data error: Temperature warning error |
| BE310C00 | SCSI sense data error: Write Error |
| BE310C01 | SCSI sense data error: Write Error Recovered With Auto-Reallocation |
| BE310C02 | SCSI sense data error: Write Error - Auto Reallocation Failed |
| BE310C03 | SCSI sense data error: Recovered write error - Recommend reassign |
| BE310C81 | SCSI sense data error: Code/Qualifier 0C/81. |
| BE311000 | SCSI sense data error: ID CRC Or ECC Error |
| BE311100 | DDM Error Threshold Exceeded: Unrecovered Read Error |
| BE311101 | SCSI sense data error: Read Retries Exhausted |
| BE311102 | SCSI sense data error: Error Too Long To Correct |
| BE311103 | SCSI sense data error: Multiple read errors. |
| BE311104 | SCSI sense data error: Unrecovered Read Error - Auto Reallocation Failed |
| BE311105 | SCSI sense data error: L-EC uncorrectable error. |
| BE311106 | SCSI sense data error: CIRC unrecovered error. |
| BE311107 | SCSI sense data error: Data resynchronization error. |
| BE311108 | SCSI sense data error: Incomplete block read. |
| BE311109 | SCSI sense data error: No gap found. |
| BE31110A | SCSI sense data error: Miscorrected error. |
| BE31110B | SCSI sense data error: Unrecovered read error - recommend reassignment. |
| BE31110C | SCSI sense data error: Unrecovered read error - recommend re-write the data. |
| BE311181 | SCSI sense data error: Code/Qualifier 11/81. |
| BE311200 | SCSI sense data error: Address Mark Not Found For ID Field |
| BE311201 | SCSI sense data error: Recovered Data Without ECC Using Previous Logical Block ID |
| BE311202 | SCSI sense data error: Recovered Data With ECC Using Previous Logical Block ID |
| BE311300 | SCSI sense data error: Address mark not found for data field. |
| BE311400 | SCSI sense data error: Logical Block Not Found |
| BE311401 | SCSI sense data error: Record Not Found |
| BE311405 | SCSI sense data error: Recovered record not found - Recommend reassign |
| BE311500 | SCSI sense data error: Random Positioning Error |
| BE311501 | SCSI sense data error: Mechanical Positioning Error |
| BE311502 | SCSI sense data error: Positioning Error Detected By Read Of Medium |
| BE311600 | SCSI sense data error: Data Synchronization Mark Error |
| BE311602 | SCSI sense data error: Recovered write error, data sync error - Recommend rewrite |
| BE311604 | SCSI sense data error: Recovered write error, data sync error - Recommend reassign |
| BE311700 | SCSI sense data error: Recovered Data With No Error Correction Applied |
| BE311701 | SCSI sense data error: Recovered Data Using Retries |
| BE311702 | SCSI sense data error: Recovered Data Using Positive Offset |
| BE311703 | SCSI sense data error: Recovered Data Using Negative Offset |
| BE311704 | SCSI sense data error: Recovered data with retries and/or CIRC applied |
| BE311705 | SCSI sense data error: Recovered Data Using Previous Logical Block ID |
| BE311706 | SCSI sense data error: Recovered Data Without ECC - Data Auto Reallocated |
| BE311707 | SCSI sense data error: Recovered data without ECC - recommend reassignment. |
| BE311708 | SCSI sense data error: Recovered data without ECC - recommend rewrite. |
| BE311800 | SCSI sense data error: Recovered Data With ECC |
| BE311801 | SCSI sense data error: Recovered Data With ECC And Retries Applied |
| BE311802 | SCSI sense data error: Recovered Data With ECC And/Or Retries, Data Auto-Reallocated |
| BE311803 | SCSI sense data error: Recovered data with CIRC. |
| BE311804 | SCSI sense data error: Recovered data with LEC. |
| BE311805 | SCSI sense data error: Recovered read error with ECC - Recommend reassign |
| BE311806 | SCSI sense data error: Recovered data using ECC and offsets |
| BE311807 | SCSI sense data error: Recovered Data With ECC - Data Rewritten |
| BE311886 | SCSI sense data error: Recovered read error with ECC (6 symbols) |
| BE311887 | SCSI sense data error: Recovered read error with ECC (7 symbols) |
| BE311888 | SCSI sense data error: Recovered read error with ECC (8 symbols) |
| BE311889 | SCSI sense data error: Recovered read error with ECC (9 symbols) |
| BE31188A | SCSI sense data error: Recovered read error with ECC (10 symbols) |
| BE311900 | SCSI sense data error: Defect List Error |
| BE311901 | SCSI sense data error: Defect List Not Available |
| BE311902 | SCSI sense data error: Defect List Error In Primary List |
| BE311903 | SCSI sense data error: Defect List Error in Grown List |
| BE311A00 | SCSI sense data error: Parameter List Length Error |
| BE311B00 | SCSI sense data error: Synchronous Data Transfer Error |
| BE311C00 | SCSI sense data error: Defect List Not Found |
| BE311C01 | SCSI sense data error: Primary Defect List Not Found |
| BE311C02 | SCSI sense data error: Grown Defect List Not Found |
| BE311C83 | SCSI sense data error: Unique Diagnostic Code |
| BE311D00 | SCSI sense data error: Miscompare During Verify Operation |
| BE311D06 | SCSI sense data error: Data integrity check took >650ms on 5 consecutive readings |
| BE311D07 | SCSI sense data error: Data integrity check failed read/write diagnostic test |
| BE311E00 | SCSI sense data error: Recovered ID with ECC. |
| BE311F00 | SCSI sense data error: Partial defect list transferred |
| BE312000 | SCSI sense data error: Invalid Command Operation Code |
| BE312100 | SCSI sense data error: Logical Block Address Out Of Range |
| BE312101 | SCSI sense data error: Invalid element address. |
| BE312200 | SCSI sense data error: Illegal function (should use 20 00, 24 00, or 26 00). |
| BE312345 | SCSI sense data error: Code/Qualifier 23/45 |
| BE312400 | SCSI sense data error: Invalid Field In CDB |
| BE312500 | SCSI sense data error: Logical Unit Not Supported |
| BE312600 | SCSI sense data error: Invalid Field In Parameter List |
| BE312601 | SCSI sense data error: Parameter Not Supported |
| BE312602 | SCSI sense data error: Parameter Value Invalid |
| BE312603 | SCSI sense data error: Invalid Field Parameter - Threshold Parameter |
| BE312610 | SCSI sense data error: Code/Qualifier 26/10 |
| BE312698 | SCSI sense data error: Invalid Field Parameter - Check Sum |
| BE312699 | SCSI sense data error: Invalid Field Parameter - Firmware Tag |
| BE312700 | SCSI sense data error: Write Protected |
| BE312800 | SCSI sense data error: Not ready to ready transition (medium may have changed). |
| BE312801 | SCSI sense data error: Import or export element accessed. |
| BE312900 | SCSI sense data error: Power On, Reset, Or Bus Device Reset Occurred |
| BE312901 | SCSI sense data error: Power-On Reset Occurred |
| BE312902 | SCSI sense data error: SCSI Bus Reset Occurred |
| BE312903 | SCSI sense data error: Bus Device Reset Function Occurred |
| BE312904 | SCSI sense data error: Device Internal Reset Occurred |
| BE312905 | SCSI sense data error: Transceiver Mode Changed To Single-Ended |
| BE312906 | SCSI sense data error: Transceiver Mode Changed To LVD |
| BE312A01 | SCSI sense data error: Mode Parameters Changed |
| BE312A02 | SCSI sense data error: Log Parameters Changed |
| BE312A03 | SCSI sense data error: Reservations preempted |
| BE312B00 | SCSI sense data error: Copy cannot execute since host cannot disconnect. |
| BE312B10 | SCSI sense data error: Code/Qualifier 2B/10 |
| BE312C00 | SCSI sense data error: Command Sequence Error |
| BE312C01 | SCSI sense data error: Too many windows specified. |
| BE312C02 | SCSI sense data error: Invalid combination of windows specified. |
| BE312D00 | SCSI sense data error: Overwrite error on update in place. |
| BE312E10 | SCSI sense data error: Code/Qualifier 2E/10 |
| BE312F00 | SCSI sense data error: Tagged Commands Cleared By Another Initiator |
| BE313000 | SCSI sense data error: Incompatible medium installed. |
| BE313001 | SCSI sense data error: Cannot read medium - unknown format. |
| BE313002 | SCSI sense data error: Cannot read medium - incompatible format. |
| BE313003 | SCSI sense data error: Cleaning cartridge installed. |
| BE313010 | SCSI sense data error: Code/Qualifier 30/10 |
| BE313100 | SCSI sense data error: Medium Format Corrupted |
| BE313101 | SCSI sense data error: Format Failed |
| BE313191 | SCSI sense data error: Format Corrupted, World Wide Name (WWN) Is Invalid |
| BE313200 | SCSI sense data error: No Defect Spare Location Available |
| BE313201 | SCSI sense data error: Defect list update Error |
| BE313202 | SCSI sense data error: No Spares Available - Too Many Defects On One Track |
| BE313500 | SCSI sense data error: Code/Qualifier 35/00. |
| BE313501 | SCSI sense data error: Code/Qualifier 35/01, unsupported storage enclosure function. |
| BE313502 | SCSI sense data error: Enclosure services unavailable |
| BE313610 | SCSI sense data error: Code/Qualifier 36/10 |
| BE313700 | SCSI sense data error: Parameter Rounded |
| BE313900 | SCSI sense data error: Saving parameters not supported. |
| BE313910 | SCSI sense data error: Code/Qualifier 39/10 |
| BE313D00 | SCSI sense data error: Invalid Bits In Identify Message |
| BE313E00 | SCSI sense data error: Logical Unit Has Not Self Configured Yet |
| BE313F00 | SCSI sense data error: Target Operating Conditions Have Changed |
| BE313F01 | SCSI sense data error: Microcode Changed |
| BE313F02 | SCSI sense data error: Changed Operating Definition |
| BE313F03 | SCSI sense data error: Inquiry data has changed. |
| BE313F0F | SCSI sense data error: Echo buffer overwritten |
| BE313F90 | SCSI sense data error: Invalid APM Parameters |
| BE313F91 | SCSI sense data error: World Wide Name (WWN) Mismatch |
| BE314000 | SCSI sense data error: RAM failure. |
| BE314001 | SCSI sense data error: DRAM Parity Error |
| BE314080 | SCSI sense data error: Degraded mode, diagnostics fail |
| BE314081 | SCSI sense data error: Degraded mode, hardware error |
| BE314082 | SCSI sense data error: Diagnostics failure, inconsistent data |
| BE314083 | SCSI sense data error: Diagnostics failure, HDA diagnostics |
| BE314084 | SCSI sense data error: Diagnostics failure, PCB diagnostics |
| BE314085 | SCSI sense data error: Diagnostic failure, RAM microcode not loaded |
| BE314090 | SCSI sense data error: Seek test failure |
| BE3140A0 | SCSI sense data error: Read/write test failure |
| BE3140B0 | SCSI sense data error: Diagnostic failure, self reset |
| BE3140C5 | SCSI sense data error: Diagnostic failure |
| BE3140D0 | SCSI sense data error: Component mismatch |
| BE314100 | SCSI sense data error: Data path failure. |
| BE314200 | SCSI sense data error: Power-On Or Self-Test Failure |
| BE314300 | SCSI sense data error: Message Reject Error |
| BE314400 | SCSI sense data error: Internal Target Failure |
| BE3144B6 | SCSI sense data error: Code/Qualifier 44/B6 |
| BE3144D7 | SCSI sense data error: Code/Qualifier 44/D7 |
| BE3144DC | SCSI sense data error: Code/Qualifier 44/DC |
| BE314500 | SCSI sense data error: Select/Reselection Failure |
| BE314600 | SCSI sense data error: Unsuccessful soft reset. |
| BE314700 | SCSI sense data error: SCSI Parity Error |
| BE314701 | SCSI sense data error: Code/Qualifier 47/01. |
| BE314800 | SCSI sense data error: Initiator Detected Error Message Received |
| BE314900 | SCSI sense data error: Invalid Message Error |
| BE314A00 | SCSI sense data error: Command phase error. |
| BE314B00 | SCSI sense data error: Data phase error. |
| BE314C00 | SCSI sense data error: Logical Unit Failed Self-Configuration |
| BE314E00 | SCSI sense data error: Overlapped Commands Attempted |
| BE314F00 | SCSI sense data error: Aborted Command due to loop initialization |
| BE315100 | SCSI sense data error: Code/Qualifier 51/00. |
| BE315400 | SCSI sense data error: SCSI to host system interface failure. |
| BE315500 | SCSI sense data error: System resource failure. |
| BE315B00 | SCSI sense data error: Log Exception |
| BE315B01 | SCSI sense data error: Threshold Condition Met |
| BE315B02 | SCSI sense data error: Log Counter At Maximum |
| BE315B03 | SCSI sense data error: Log List Codes Exhausted |
| BE315C00 | SCSI sense data error: RPL Status Change |
| BE315C01 | SCSI sense data error: Spindles Synchronized |
| BE315C02 | SCSI sense data error: Spindles Not Synchronized |
| BE315D00 | SCSI sense data error: Predictive Failure Analysis Threshold Exceeded |
| BE315DFF | SCSI sense data error: Predictive Failure Analysis test warning |
| BE316000 | SCSI sense data error: Lamp Failure. |
| BE316002 | Disk drive asynchronous health check - replace disk. |
| BE316003 | Transient LRC error in a single Block. |
| BE316004 | Drive has been reset due to invalid SCSI protocol. |
| BE316005 | The disk drive reallocation exceeded (no space left.) |
| BE316006 | The disk drive has been reset by the adapter. The disk drive may be about to fail. |
| BE316007 | I/O queued too long |
| BE316008 | A disk drive module has a "Failed" status. |
| BE316009 | The adapter is unable to initialize a device. |
| BE31600B | Disk drive not initialized, capacity too small |
| BE31600C | Disk drive not initialized, unsupported device |
| BE316010 | Disused Device Port |
| BE316011 | A device is present but it is not logged-in through either of its ports. |
| BE316012 | A device is present but Port Login was rejected on both ports. |
| BE316013 | Permanent unrecoverable LRC errors in multiple Blocks. |
| BE316014 | Permanent unrecoverable LRC error in a single Block. |
| BE316017 | Disk drive failed initialization. |
| BE316018 | Slow disk threshold exceeded. |
| BE316021 | Security In Doubt Drive. |
| BE316023 | Security Degraded Drive. |
| BE316200 | SCSI sense data error: Scan head positioning error. |
| BE316300 | SCSI sense data error: End of user area encountered on this track. |
| BE316400 | SCSI sense data error: Illegal mode for this track. |
| BE316500 | SCSI sense data error: Voltage Fault |
| BE318000 | SCSI sense data error: General Firmware Error Qualifier |
| BE318001 | SCSI sense data error: Code/Qualifier 80/01. |
| BE318002 | SCSI sense data error: Code/Qualifier 80/02. |
| BE318003 | SCSI sense data error: Code/Qualifier 80/03. |
| BE318004 | SCSI sense data error: Code/Qualifier 80/04. |
| BE318005 | SCSI sense data error: Code/Qualifier 80/05. |
| BE318006 | SCSI sense data error: Code/Qualifier 80/06. |
| BE318007 | SCSI sense data error: Code/Qualifier 80/07. |
| BE318087 | I/O Error Detection and Correction Checksum (IOEDC) Error on Write. |
| BE31808A | SCSI sense data error: Code/Qualifier 80/8A |
| BE31808B | SCSI sense data error: Code/Qualifier 80/8B |
| BE31808C | SCSI sense data error: Code/Qualifier 80/8C |
| BE318100 | SCSI sense data error: Internal Logic Error |
| BE318101 | SCSI sense data error: Code/Qualifier 81/01. |
| BE318102 | SCSI sense data error: Code/Qualifier 81/02. |
| BE318103 | SCSI sense data error: Code/Qualifier 81/03. |
| BE318104 | SCSI sense data error: Code/Qualifier 81/04. |
| BE318105 | SCSI sense data error: Code/Qualifier 81/05. |
| BE318106 | SCSI sense data error: Code/Qualifier 81/06. |
| BE3188FE | SCSI sense data error: Code/Qualifier 88/FE |
| BE31CFE7 | Security Degraded condition detected during security healthcheck. |
| BE31CFE8 | Band mismatch condition detected during security healthcheck. |
| BE31CFE9 | Security In Doubt condition detected during security healthcheck. |
| BE31F001 | SCSI sense data error: Filemark detected. |
| BE31F002 | SCSI sense data error: End-of-partition/medium detected. |
| BE31F003 | SCSI sense data error: Setmark detected. |
| BE31F004 | DDM Reported Error: PIN Migration failed. |
| BE31F005 | DDM Reported Error: FDE spare enrollment failed. |
| System reference code | Description |
|---|---|
| BE320010 | Invalid storage enclosure CuDv or CuAt ODM object. |
| BE320200 | Ferroelectric random access memory (FRAM) test failed. |
| BE320202 | EPOW signal from power supply unit (PSU) 1 detected active. |
| BE320203 | EPOW signal from power supply unit (PSU) 2 detected active. |
| BE320204 | EPOW_C asserted due to both PsnEPOWe inputs asserted. |
| BE320205 | Targeted loop initialization primitive received. |
| BE320207 | Erase failure of storage enclosure EEPROM 1. |
| BE320208 | Write failure of storage enclosure EEPROM 1. |
| BE320209 | Read failure of storage enclosure EEPROM 1. |
| BE32020A | Checksum failure of storage enclosure EEPROM 1. |
| BE32020B | Erase failure of storage enclosure EEPROM 2. |
| BE32020C | Write failure of storage enclosure EEPROM 2. |
| BE32020D | Read failure of storage enclosure EEPROM 2. |
| BE32020E | Checksum failure of storage enclosure EEPROM 2. |
| BE32020F | Erase failure on Enclosure Controller Module (ECM) VPD. |
| BE320210 | Write failure on Enclosure Controller Module (ECM) VPD. |
| BE320211 | Read failure on Enclosure Controller Module (ECM) VPD. |
| BE320212 | Checksum failure on Enclosure Controller Module (ECM) VPD. |
| BE320213 | VPD erase failure on power supply unit (PSU) 1. |
| BE320214 | VPD write failure on power supply unit (PSU) 1. |
| BE320215 | VPD read failure on power supply unit (PSU) 1. |
| BE320216 | VPD checksum failure on power supply unit (PSU) 1. |
| BE320217 | VPD erase failure on power supply unit (PSU) 2. |
| BE320218 | VPD write failure on power supply unit (PSU) 2. |
| BE320219 | VPD read failure on power supply unit (PSU) 2. |
| BE32021A | VPD checksum failure on power supply unit (PSU) 2. |
| BE32021B | Checksum/read failures of both storage enclosure EEPROMs. |
| BE32021C | Storage enclosure EEPROMs contain different data. |
| BE32021D | Frame received violating interlocked rules. |
| BE32021E | Internal SerDes error on all ports. |
| BE32021F | Enclosure Controller Module (ECM) not compatible with the enclosure. |
| BE320223 | Temperature does not decrease after speeding up fans. |
| BE320224 | Storage enclosure I2C Bus failure reported on power supply unit (PSU) 1. |
| BE320225 | Storage enclosure I2C Bus failure reported on power supply unit (PSU) 2. |
| BE320226 | Storage enclosure I2C Bus failure reported on midplane VPD EEPROM 1. |
| BE320227 | Storage enclosure I2C Bus failure reported on midplane VPD EEPROM 2. |
| BE320228 | Storage enclosure I2C Bus timeouts reported on power supply unit (PSU) 1. |
| BE320229 | Storage enclosure I2C Bus timeouts reported on power supply unit (PSU) 2. |
| BE32022A | Storage enclosure I2C Bus timeouts reported on midplane VPD EEPROM 1. |
| BE32022B | Storage enclosure I2C Bus timeouts reported on midplane VPD EEPROM 2. |
| BE32022C | Power supply unit (PSU) 1 reports different value than what enclosure controller module (ECM) 1 is driving for Power_Off signal. |
| BE32022D | Power supply unit (PSU) 1 reports different value than what enclosure controller module (ECM) 2 is driving for Power_Off signal. |
| BE32022E | Power supply unit (PSU) 1 reports different value than what enclosure controller module (ECM) 1 is driving for Present signal. |
| BE32022F | Power supply unit (PSU) 1 reports different value than what enclosure controller module (ECM) 2 is driving for Present signal. |
| BE320230 | Power supply unit (PSU) 2 reports different value than what enclosure controller module (ECM) 1 is driving for Power_Off signal. |
| BE320231 | Power supply unit (PSU) 2 reports different value than what enclosure controller module (ECM) 2 is driving for Power_Off signal. |
| BE320232 | Power supply unit (PSU) 2 reports different value than what enclosure controller module (ECM) 1 is driving for Present signal. |
| BE320233 | Power supply unit (PSU) 2 reports different value than what enclosure controller module (ECM) 2 is driving for Present signal. |
| BE320235 | Power supply unit (PSU) 1 status signal (Present) mismatch between the enclosure controller modules (ECM). |
| BE320236 | Power supply unit (PSU) 2 status signal (Present) mismatch between the enclosure controller modules (ECM). |
| BE320237 | Power supply unit (PSU) 1 status signal (Alert) mismatch between the enclosure controller modules (ECM). |
| BE320238 | Power supply unit (PSU) 2 status signal (Alert) mismatch between the enclosure controller modules (ECM). |
| BE320239 | Power supply unit (PSU) 1 communication failure. |
| BE32023A | Power supply unit (PSU) 2 communication failure. |
| BE32023C | Maximum number of storage enclosures exceeded on a loop of storage enclosures. |
| BE32023D | Inconsistent storage enclosure topology. |
| BE32023E | Two storage enclosures have the same ID. |
| BE32023F | Invalid topology configuration. |
| BE320240 | Storage enclosure is incorrectly cabled. Crossed A and B sides within one loop of enclosures. |
| BE320241 | Storage enclosure is incorrectly cabled. Connection to bottom of stack of enclosures. |
| BE320242 | Storage enclosure is incorrectly cabled. Connecting one enclosure to more than two other enclosures. |
| BE320243 | Storage enclosure is incorrectly cabled. Single cascade connection. |
| BE320244 | Storage enclosure is incorrectly cabled. The enclosure is not in the correct sequence. |
| BE320245 | Unsupported frame (not DATA, XFER_RDY, or RESPONSE). |
| BE320246 | Boot image CRC error. |
| BE320247 | Programmable Interface Controller (PIC) image CRC error. |
| BE320248 | Phy (SerDes) Controller (PHYC) image CRC error. |
| BE320249 | Complex Programmable Logic Device (CPLD) image CRC error. |
| BE32024A | Image upgrade failure for Boot-Loader. |
| BE32024B | Image upgrade failure for Programmable Interface Controller (PIC). |
| BE32024C | Image upgrade failure for Phy (SerDes) Controller (PHYC). |
| BE32024D | Image upgrade failure for Complex Programmable Logic Device (CPLD). |
| BE32024E | Failure to claim arbitrated loop physical address (ALPA). |
| BE32024F | End of frame (EOF) or Start of frame (SOF) error. |
| BE320250 | FIFO overflow. |
| BE320251 | Ox_ID/RD_ID not matching expected value. |
| BE320252 | Non Class 3 frame detected. |
| BE320253 | Fibre Channel frame received that was below expected size. |
| BE320254 | Fibre Channel frame received that exceeded expected size. |
| BE320255 | Fibre Channel frame received without credit. |
| BE320256 | Resource recovery timeout value (R_R_TOV) sequence initiative. |
| BE320258 | Context (TAG) out of range. |
| BE32025A | Context (TAG) inactive. |
| BE32025B | ICT (Initiator Connection Tag) mismatch. |
| BE32025D | No acknowledgement (NAK) received from Programmable Interface Controller (PIC). |
| BE32025E | Time out in Programmable Interface Controller (PIC) communication. |
| BE32025F | Alternate Enclosure Controller Module (ECM) power fail. |
| BE320260 | Alternate Enclosure Controller Module (ECM) has Programmable Interface Controller (PIC) communication problem. |
| BE320261 | Address mismatch during OPEN Address Frame. |
| BE320262 | Hash check failed for source or destination address. |
| BE320263 | Data frame payload length zero or XFER_RDY requesting zero data. |
| BE320264 | Temperature sensor failure - power supply unit (PSU) 1. |
| BE320265 | Temperature sensor failure - power supply unit (PSU) 2. |
| BE320266 | Alternate Enclosure Controller Module (ECM) Programmable Interface Controller (PIC) watchdog reset. |
| BE320268 | Loss of power on one power supply - power supply unit (PSU) 2. |
| BE320269 | No EPOW signal when power supply removed - power supply unit (PSU) 2. |
| BE32026A | False PSnEPOWe signal. PSnEPOWe asserted but power supply reports good - power supply unit (PSU) 2. |
| BE32026C | Stuck in initialization (LIP -> CLS). |
| BE320270 | Both Enclosure Controller Modules (ECM) in an enclosure have the same Slot ID. |
| BE320271 | Fourth unexpected or self-initiated reboot in 24 hours. |
| BE320272 | Over temperature, warning threshold exceeded. |
| BE320273 | Temperature sensor failure - Enclosure Controller Module (ECM). |
| BE320274 | Fan failure. Fan speed different than set fan speed. - power supply unit (PSU) 1, fan 1. |
| BE320275 | Fan failure. Fan speed different than set fan speed. - power supply unit (PSU) 1, fan 2. |
| BE320276 | Fan failure. Fan speed different than set fan speed. - power supply unit (PSU) 1, fan 3. |
| BE320277 | Fan failure. Fan speed different than set fan speed. - power supply unit (PSU) 1, fan 4. |
| BE320278 | Fan failure. Fan speed different than set fan speed. - power supply unit (PSU) 2, fan 1. |
| BE320279 | Fan failure. Fan speed different than set fan speed. - power supply unit (PSU) 2, fan 2. |
| BE32027A | Fan failure. Fan speed different than set fan speed. - power supply unit (PSU) 2, fan 3. |
| BE32027B | Fan failure. Fan speed different than set fan speed. - power supply unit (PSU) 2, fan 4. |
| BE32027C | Power supply unit (PSU) 1, DC over voltage. |
| BE32027D | Power supply unit (PSU) 2, DC over voltage. |
| BE32027E | Power supply unit (PSU) 1, PS_ALERT signal active but no error reported. |
| BE32027F | Power supply unit (PSU) 2, PS_ALERT signal active but no error reported. |
| BE320280 | Voltage sensor reading above/below thresholds - (12v In OV). |
| BE320281 | Voltage sensor reading above/below thresholds - (5v ECM OV). |
| BE320282 | Voltage sensor reading above/below thresholds - (5v Standby OV). |
| BE320283 | Voltage sensor reading above/below thresholds - (3.3v ECM OV). |
| BE320284 | Voltage sensor reading above/below thresholds - (1.8v ECM OV). |
| BE320285 | Voltage sensor reading above/below thresholds - (1.2v ECM OV). |
| BE320286 | Voltage sensor reading above/below thresholds - (1.5v ECM OV). |
| BE320287 | Voltage sensor reading above/below thresholds - (3v ECM OV). |
| BE320288 | Voltage sensor reading above/below thresholds - (2.5v ECM, SOC PLL1 OV). |
| BE320289 | Voltage sensor reading above/below thresholds - (2.5v ECM, SOC PLL2 OV). |
| BE32028A | Voltage sensor reading above/below thresholds - (3.3v Standby OV). |
| BE32028B | Voltage sensor reading above/below thresholds - (12v In UV). |
| BE32028C | Voltage sensor reading above/below thresholds - (5v ECM UV). |
| BE32028D | Voltage sensor reading above/below thresholds - (5v Standby UV). |
| BE32028E | Voltage sensor reading above/below thresholds - (3.3v ECM UV). |
| BE32028F | Voltage sensor reading above/below thresholds - (1.8v ECM UV). |
| BE320290 | Voltage sensor reading above/below thresholds - (1.2v ECM UV). |
| BE320291 | Voltage sensor reading above/below thresholds - (1.5v ECM UV). |
| BE320292 | Voltage sensor reading above/below thresholds - (3v ECM UV). |
| BE320293 | Voltage sensor reading above/below thresholds - (2.5v ECM, SOC PLL1 UV). |
| BE320294 | Voltage sensor reading above/below thresholds - (2.5v ECM, SOC PLL2 UV). |
| BE320295 | Voltage sensor reading above/below thresholds - (3.3v Standby UV). |
| BE320296 | Over temperature, critical threshold exceeded. |
| BE320297 | Alternate Enclosure Controller Module (ECM) over voltage. |
| BE320298 | Alternate Enclosure Controller Module (ECM) under voltage. |
| BE320299 | Intra Enclosure Controller Module (ECM) communication fails on both paths. |
| BE32029A | Watchdog timer expired. |
| BE32029B | Enclosure program encountered error (Assert). |
| BE32029C | Enclosure program encountered error (Exception ISR). |
| BE32029D | Intra Enclosure Controller Module (ECM) communication fails on single path. |
| BE32029E | Internal Parity Error in Switch on a chip (SOC) Domain. |
| BE32029F | Transient parity error - Port Logic. |
| BE3202A0 | Transient parity error - Bridge Logic. |
| BE3202A2 | Processor Virtual Port (PVP) internal errors. |
| BE3202A3 | Alternate Enclosure Controller Module (ECM) reports EPOW_C but EPOW not sensed at this ECM. |
| BE3202A4 | EPOW_C asserted but one or both PsnEPOWe signals not asserted. |
| BE3202A5 | Loss of power on one power supply - power supply unit (PSU) 1. |
| BE3202A6 | No EPOW signal when power supply removed - power supply unit (PSU) 1. |
| BE3202A7 | False PSnEPOWe signal. PSnEPOWe asserted but power supply reports good - power supply unit (PSU) 1. |
| BE3202A8 | Power Supply removed. |
| BE3202A9 | False indication of power supply removed - power supply unit (PSU) 1. |
| BE3202AA | No EPOW_C when both PsnEPOWe asserted. |
| BE3202AB | False indication of power supply removed - power supply unit (PSU) 2. |
| BE3202AD | Invalid CRC of the primary or backup image. |
| BE3202AE | Invalid CRC of the old image. |
| BE3202AF | Complex Programmable Logic Device (CPLD) error corrected. |
| BE3202B0 | Storage Enclosure Controller Module (ECM) UART test failed. |
| BE3202B1 | UART test failed between storage enclosure controller modules. |
| BE3202B2 | Storage enclosure programmable interface controller UART test failed. |
| BE3202B3 | Voltage sensor test failed. |
| BE3202B4 | Firmware version mismatch between ECMs. |
| BE3202B5 | Power supply unit (PSU) 1, DC under voltage. |
| BE3202B6 | Power supply unit (PSU) 2, DC under voltage. |
| BE3202B7 | Power supply unit (PSU) 1, Over temperature. |
| BE3202B8 | Power supply unit (PSU) 2, Over temperature. |
| BE3202B9 | Power supply unit (PSU) 1, AC fail. |
| BE3202BA | Power supply unit (PSU) 2, AC fail. |
| BE3202BB | Power supply unit (PSU) 1, DC fail. |
| BE3202BC | Power supply unit (PSU) 2, DC fail. |
| BE3202BD | Programmable Interface Controller (PIC) to PIC communication failure. |
| BE3202BE | Configuration settings do not match between ECMs in an enclosure (LIP Enable). |
| BE3202BF | Configuration settings do not match between ECMs in an enclosure (Port Speed). |
| BE3202C0 | Configuration settings do not match between ECMs in an enclosure (Port Type). |
| BE3202C1 | Configuration settings do not match between ECMs in an enclosure (Port Enable). |
| BE3202C2 | Configuration settings do not match between ECMs in an enclosure (Zone Enable). |
| BE3202C3 | Configuration settings do not match between ECMs in an enclosure (Blocking ARB). |
| BE3202C4 | Storage enclosure Fibre Channel interface card has exceeded the threshold for recoverable data transfer Context Full errors. |
| BE3202C5 | Storage enclosure Fibre Channel interface card has exceeded the threshold for recoverable context engine lock Up errors. |
| BE321100 | I2C timeout: Remote SSC200 (processor) |
| BE321101 | I2C timeout: DS1721 (Temperature Sensor) |
| BE321102 | I2C timeout: PCA9552-0 (I/O Expander) |
| BE321103 | I2C timeout: PCA9552-1 (I/O Expander) |
| BE321104 | I2C timeout: PCA9552-2 (I/O Expander) |
| BE321105 | I2C timeout: SOC320 (FC Loop Switch) |
| BE32110B | I2C timeout: PCA9555-2 (I/O Expander on Sense Card, pass-3) |
| BE321116 | I2C timeout: DS1855 (Digipot) |
| BE321200 | GPIO Miscompare: Slot 0 Fault LED |
| BE321201 | GPIO Miscompare: Slot 1 Fault LED |
| BE321202 | GPIO Miscompare: Slot 2 Fault LED |
| BE321203 | GPIO Miscompare: Slot 3 Fault LED |
| BE321204 | GPIO Miscompare: Slot 4 Fault LED |
| BE321205 | GPIO Miscompare: Slot 5 Fault LED |
| BE321206 | GPIO Miscompare: Slot 6 Fault LED |
| BE321207 | GPIO Miscompare: Slot 7 Fault LED |
| BE321208 | GPIO Miscompare: Slot 8 Fault LED |
| BE321209 | GPIO Miscompare: Slot 9 Fault LED |
| BE32120A | GPIO Miscompare: Slot 10 Fault LED |
| BE32120B | GPIO Miscompare: Slot 11 Fault LED |
| BE32120C | GPIO Miscompare: Slot 12 Fault LED |
| BE32120D | GPIO Miscompare: Slot 13 Fault LED |
| BE32120E | GPIO Miscompare: Slot 14 Fault LED |
| BE32120F | GPIO Miscompare: Slot 15 Fault LED |
| BE321210 | GPIO Miscompare: Pack Fault LED |
| BE321211 | GPIO Miscompare: Partner Card Fault LED |
| BE321212 | GPIO Miscompare: SOC320 Reset A |
| BE321213 | GPIO Miscompare: Sense Card I2C Reset |
| BE321214 | GPIO Miscompare: Sense Card Identity |
| BE321215 | GPIO Miscompare: Local Card Fault LED |
| BE321216 | GPIO Miscompare: Connector 3 LED |
| BE321217 | GPIO Miscompare: Connector 2 LED |
| BE321218 | GPIO Miscompare: Connector 1 LED |
| BE321219 | GPIO Miscompare: Connector 0 LED |
| BE32121A | GPIO Miscompare: Drive Address Buffer Enable |
| BE32121B | GPIO Miscompare: Expander I2C Reset |
| BE32121C | GPIO Miscompare: SOC320 Reset B |
| BE32121D | GPIO Miscompare: Watchdog Timer Reset |
| BE321302 | GPIO Miscompare: Sense Card LED |
| BE321305 | GPIO Miscompare: Sense Card Over Temp Notify |
| BE321310 | Flash Write Failure |
| BE321311 | Flash Erase Failure |
| BE321312 | VPD Write Failure Ras |
| BE321313 | VPD Erase Failure |
| BE321314 | SES has taken an internal statesave |
| BE321315 | SES has detected an internal hardware error |
| BE321316 | FCIC detected problem with FCIC Location Signal - left FCIC Card |
| BE321317 | FCIC detected problem with FCIC Location Signal - right FCIC Card |
| BE321318 | Unexpected amount of self-initiated FCIC Card reboots occurred. |
| BE321319 | EPOW Signal from PPS1 (cpPPSr0, r=rack) |
| BE32131A | EPOW Signal from PPS2 (cpPPSr1, r=rack) |
| BE32131B | Storage enclosure reporting 12V Under Voltage. |
| BE32131C | Storage enclosure reporting 12V Over Voltage. |
| BE32131D | Storage enclosures reporting 5V Under Voltage. |
| BE32131E | Storage enclosures reporting 5V Over Voltage. |
| BE322001 | PTBI Error |
| BE322002 | Fibre Channel Cable Failure |
| BE322003 | Fibre Channel Cable Failure |
| BE322101 | Port Test Before Insert (PTBI) failure. |
| BE322104 | CRC error. |
| BE322105 | SEOC passes and PTBI fails. |
| BE322106 | Serial Number Exchange On Connect (SEOC) failure. |
| BE322108 | Loss of signal detected. |
| BE322109 | Storage enclosure is incorrectly cabled. Connecting one enclosure to more than two other enclosures. |
| BE32210A | Internal SerDes error. |
| BE32210B | SFP present but unable to read VPD. |
| BE32210C | SAS protocol attempted. |
| BE32210D | Port bypassed. |
| BE32210F | Transmit (TX) fault detected. |
| BE322110 | Port (DDM or SFP) removed. |
| BE322111 | Loss of sync. |
| BE322112 | Comma character timeout. |
| BE322113 | Wrong speed attempted - Port not running at set speed. |
| BE322114 | Unknown ordered set. |
| BE322115 | Clock accuracy (PPM) out of spec. |
| BE322116 | Checksum/read failure on SFP VPD. |
| BE322117 | Invalid received word (Rx). |
| BE322118 | Multiple connection stall timeouts. |
| BE322119 | Reception of loop initialization primitive (F8, xx). |
| BE32211A | Reception of directed loop initialization primitive. |
| BE32211C | Arbitrated loop physical address (ALPA) claimed multiple times. |
| BE32211D | Loop initialization timeout (LIxA). |
| BE32211E | Loop initialization timeout (LISM). |
| BE322125 | Unexpected Open received. |
| BE322126 | Reflected Open. |
| BE32212A | Storage enclosure is incorrectly cabled. Crossed A and B sides within one loop of enclosures. |
| BE322130 | SFP temperature high. |
| BE322131 | SFP voltage (Vcc) high. |
| BE322132 | SFP voltage (Vcc) low. |
| BE322133 | Measured SFP Transmit (Tx) bias exceeds high value. |
| BE322134 | Measured SFP Transmit (Tx) bias below low value. |
| BE322135 | Measured SFP Receive (Rx) power exceeds high value. |
| BE322136 | Measured SFP Receive (Rx) power below low value. |
| BE322137 | DDM not seated properly. |
| BE322138 | Phy (SerDes) Controller (PHYC) Failure. |
| BE322139 | Data word sync reset. |
| BE32213A | Phy (SerDes) Controller (PHYC) layer reset. |
| BE32213D | OPEN Rejects - Command, Task, Data. |
| BE32213F | OPEN Timeout - Command, Task, Data. |
| BE322141 | Multiple DONE or CLOSE timeouts. |
| BE322142 | BREAK timeout. |
| BE322143 | BREAK received in response to OPEN Address Frame - Command, Task, Data. |
| BE322145 | BREAK received after connection established but before ACK/NAK balance - Command, Task, Data. |
| BE322147 | BREAK received after connection established and after ACK/NAK balance. |
| BE322148 | Enhanced Port Test Before Insert (EPTBI) Failed. |
| BE322149 | No acknowledgement (NAK) received - Command, Task, Data. |
| BE32214A | No acknowledgement (NAK) received by DDM. |
| BE32214B | Acknowledgement (ACK/NAK) timeout - Command, Task, Data. |
| BE32214D | Credit timeout - Command, Task, Data. |
| BE32214F | Primitive Error (no K character or invalid 8/10b encoding). |
| BE322150 | Unknown primitive. |
| BE32215B | OPEN Address Frame to initiator not logged in on Fibre Channel. |
| BE32215C | OPEN Address Frame with unsupported protocol, connection rate, or wrong destination. |
| BE32215D | OPEN Address Frame with: errors detected. |
| BE32215E | IDENTIFY or Open Address Frame with errors detected. |
| BE322164 | Switch on a chip (SOC) taken offline. |
| BE322166 | SAS Port set to Fibre Channel Mode. |
| BE322167 | SAS Port set to force bypass. |
| BE327000 | Storage enclosure power supply repair has detected a communication failure between the ICs and PSU. |
| BE327001 | AC fail has been detected on a storage enclosure power supply and the PSU or PDU was isolated. |
| BE327002 | AC fail has been detected on one or more storage enclosure power supplies and root cause could not be isolated. |
| BE327003 | DC over voltage condition has been detected on a storage enclosure power supply. |
| BE327004 | DC under voltage condition has been detected on a storage enclosure power supply. |
| BE327005 | DC fail voltage condition has been detected on a storage enclosure power supply. |
| BE327006 | Storage enclosure power supply has detected a fault condition. |
| BE327007 | Storage enclosure power supply has detected an over temperature condition. |
| BE327009 | Storage enclosure interface card(s) have detected a storage enclosure power supply is installed but with failures. |
| BE327010 | Storage enclosure interface card(s) have detected a storage enclosure power supply is not installed. |
| BE327011 | Storage enclosure interface card(s) have detected a storage enclosure power supply with unexpected status. |
| BE327012 | Storage enclosure power supply has detected BOTH ICs missing (this could be a false error or issue with power supply). |
| BE327013 | Storage enclosure interface card(s) have detected EPOW condition with one or more power supplies. |
| BE327014 | Storage enclosure interface card(s) have detected EPOW condition, but the condition cannot be fully isolated. |
| BE327015 | Storage enclosure FCIC card(s) requested storage enclosure power supplies to power off. |
| BE327016 | One or more storage enclosure interface card(s) have signaled the storage enclosure power supplies to power off, but a status conflict is detected. |
| BE327017 | Storage enclosure interface card(s) have detected the storage enclosure power supply asserting alert status. |
| BE327018 | Storage enclosure interface card(s) have detected the storage enclosure power supply asserting alert status, but the power supply does not report the same status. |
| BE327019 | Storage enclosure power supply verification has detected the storage enclosure power supply fans have not returned to normal after the service action. |
| BE327020 | Storage enclosure power supply firmware download has failed for unknown reason, but no faults were detected on installed power supply. |
| BE327021 | Storage enclosure power supply verification was unable to verify the status of the partner power supply so did not continue with firmware update. |
| BE327022 | Storage enclosure power supply verification was unable to discover associated enclosure and cannot continue (possible both power supplies do not have power or do not function). |
| BE32CEA0 | Unexpected storage enclosure error code detected. |
| BE32CEF0 | Unexpected storage enclosure error code detected. |
| System reference code | Description |
|---|---|
| BE330000 | Unknown Exception Symptom Code. |
| BE33CE00 | DA Hardware Error: Fatal Error. |
| BE33CE01 | DA Hardware Error: Bad INIT Command Error. |
| BE33CE02 | DA Hardware Error: Bad Download Command Error. |
| BE33CE03 | DA Hardware Error: Restart State. |
| BE33CE04 | DA Hardware Error: Dead State. |
| BE33CE05 | DA Hardware Error: Ping TO With Adapter Error. |
| BE33CE06 | DA Hardware Error: Ping TO With NO Adapter Error. |
| BE33CE07 | DA Hardware Error: Quiesce Timeout. |
| BE33CE08 | DA Hardware Error: Reset Complete Failed. |
| BE33CE09 | DA Hardware Error: Gateway Disconnect Failed. |
| BE33CE0A | DA Hardware Error: Reset 64 Failed. |
| BE33CE0B | DA Hardware Error: Reset INIT Failed. |
| BE33CE0C | DA Hardware Error: Download Reset Complete Failed. |
| BE33CE0D | DA Hardware Error: Download 64 Failed. |
| BE33CE0E | DA Hardware Error; Download DNLD Failed. |
| BE33CE0F | DA Hardware Error: Terminate Reset Complete Failed. |
| BE33CE10 | DA Hardware Error: Showstop Timeout. |
| BE33CE11 | DA Hardware Error: Device Adapter VPD Timeout. |
| BE33CE12 | DA Hardware Error: Ping TO With Adapter Error on last path to data. |
| BE33CE13 | DA Hardware Error: Exceeded maximum allowed DAs. |
| BE33CE14 | DA Hardware Error: DA_4460_NVRAM_FAILURE. |
| BE33CE15 | DA Hardware Error: DA_4461_NVRAM_CORRECT_FAILURE. |
| BE33CE16 | DA Hardware Error: DA_4471_CSSINGLE_BITERR. |
| BE33CE17 | DA Hardware Error: DA_4472_SDRAM_SINGLEBIT_ERR. |
| BE33CE18 | DA Hardware Error: Device Adapter DMA push invalid known pattern. |
| BE33CE19 | DA Hardware Error: Device Adapter DMA push invalid address. |
| BE33CE1A | DA Hardware Error: The FCAL network is not stable enough for RAID to progress. |
| BE33CE1B | DA Hardware Error: Internal error in the ARC firmware. |
| BE33CE1C | DA Hardware Error: Bad SY_Code. |
| BE33CE1D | DA Hardware Error: DPB_Number too high. |
| BE33CE1E | DA Hardware Error: Illegal DP_Pending. |
| BE33CE1F | DA Hardware Error: Directive returned; DP_aborting. |
| BE33CE20 | DA Hardware Error: Showstop error happened. |
| BE33CE21 | DA Hardware Error: DPB has wrong safety value in Knl_CompleteDirective. |
| BE33CE22 | DA Hardware Error: Idsb != DP_Pending to DP_Aborting in Knl_CompleteDirective. |
| BE33CE23 | DA Hardware Error: Den_default called. |
| BE33CE24 | DA Hardware Error: Dab_default called. |
| BE33CE25 | DA Hardware Error: Bad period in Den_NoOperation. |
| BE33CE26 | DA Hardware Error: Bad flag value in Dab_NoOperation. |
| BE33CE27 | DA Hardware Error: DP_Pending in Den_AbortDirective2. |
| BE33CE28 | DA Hardware Error: DP_Aborting returned from abort routine. |
| BE33CE29 | DA Hardware Error: DefaultIsr called. |
| BE33CE2A | DA Hardware Error: Number too large in Knl_ProcessInterupt. |
| BE33CE2B | DA Hardware Error: Zero time in clock block. |
| BE33CE2C | DA Hardware Error: Thread routine called with CTask == 0. |
| BE33CE2D | DA Hardware Error: Knl_RoundRobin called with F/G task. |
| BE33CE2E | DA Hardware Error: DC_ExitThread without SY_None. |
| BE33CE2F | DA Hardware Error: Thread routine called without thread support. |
| BE33CE30 | DA Hardware Error: Den_AllowcateBytes > D__MAXMALLOC. |
| BE33CE31 | DA Hardware Error: Malloc failure. |
| BE33CE32 | DA Hardware Error: Corrupt MCB_DestinationNode in Dab_startTranssaction. |
| BE33CE33 | DA Hardware Error: Knl_CompleteMcbDirective not called with MCB. |
| BE33CE34 | DA Hardware Error: sop->SOP_Tcb == 0 in DC_SlavdOperation. |
| BE33CE35 | DA Hardware Error: TCB_SlaveOperationEntryPoint == 0 in Den_SlaveOperation. |
| BE33CE36 | DA Hardware Error: No default service. |
| BE33CE37 | DA Hardware Error: Strange error from DC_Allocate bytes. |
| BE33CE38 | DA Hardware Error: Strange error from DC_Free bytes. |
| BE33CE39 | DA Hardware Error: Directive failure. |
| BE33CE3A | DA Hardware Error: Lst function: qh == 0. |
| BE33CE3B | DA Hardware Error: Lst function: ve == 0. |
| BE33CE3C | DA Hardware Error: Que function: qh == 0. |
| BE33CE3D | DA Hardware Error: Que function: ve == 0. |
| BE33CE3E | DA Hardware Error: No background thread support. |
| BE33CE3F | DA Hardware Error: TCB not active in ipng00. |
| BE33CE40 | DA Microcode Error: First Reset. |
| BE33CE41 | DA Microcode Error: Open Restart. |
| BE33CE42 | DA Microcode Error: Reset Locked. |
| BE33CE43 | DA Microcode Error: GF Reset Adapter. |
| BE33CE44 | DA Microcode Error: Gateway Disconnect. |
| BE33CE45 | DA Microcode Error: Download Start. |
| BE33CE46 | DA Microcode Error: ISSDS Reset. |
| BE33CE47 | DA Microcode Error: Warmstart Force. |
| BE33CE48 | DA Microcode Error: Warmstart No Skip. |
| BE33CE49 | DA Microcode Error: Download Successful. |
| BE33CE4A | DA Microcode Error: Partner Disconnect. |
| BE33CE4B | DA Microcode Error: Heartbeat Invalid. |
| BE33CE4C | DA Microcode Error: Inbound Queue 1. |
| BE33CE4D | DA Microcode Error: Inbound Queue 2. |
| BE33CE4E | DA Microcode Error: Reply Unexpected. |
| BE33CE4F | DA Microcode Error: TCB Start Slave Failed. |
| BE33CE50 | DA Microcode Error: MCB Fail Start. |
| BE33CE51 | DA Microcode Error: Fail Send Ping. |
| BE33CE52 | DA Microcode Error: IOCTL Timeout. |
| BE33CE53 | DA Microcode Error: Dead State No Fence. |
| BE33CE54 | DA Microcode Error: IRQ Read Failed. |
| BE33CE55 | DA Microcode Error: EEH Recovery Failed. |
| BE33CE56 | DA Microcode Error: TCB Start Init Failed. |
| BE33CE57 | DA Microcode Error: TCB Start DNLD Failed. |
| BE33CE58 | DA Microcode Error: Dump Failed. |
| BE33CE59 | DA Microcode Error: DA Failover/Failback. |
| BE33CE5A | DA Microcode Error: DA Requested Reset. |
| BE33CE5B | DA Microcode Error: DA No Data in EIR. |
| BE33CE5C | DA Microcode Error: DA Informational Event. |
| BE33CE5D | DA Microcode Error: DA Unknown Error. |
| BE33CE5E | DA Microcode Error: Device Adapter Requested Reset. |
| BE33CE5F | DA Microcode Error: DA Fence due to Fabric. |
| BE33CE60 | DA Microcode Error: DA Error in Fabric. |
| BE33CE61 | DA Microcode Error: DA/Fabric Error in Fabric. |
| BE33CE62 | DA Microcode Error: DA Requested Reset. |
| BE33CE63 | DA Microcode Error: DA Informational Error. |
| BE33CE64 | DA Microcode Error: DA No Data in EIR. |
| BE33CE65 | DA Microcode Error: Unknown DA Error. |
| BE33CE66 | DA Microcode Error: Device Adapter Requested Reset. |
| BE33CE67 | DA Microcode Error: DA Send Mail Failure. |
| BE33CE68 | DA Microcode Error: BAD LRC ON EIR. |
| BE33CE69 | DA Microcode Error: Drive Dumps Available. |
| BE33CE6A | DA Microcode Error: IOCTL Failure. |
| BE33CE6B | DA Microcode Error: DA Favored Cache LRC. |
| BE33CE6C | DA Microcode Error: Config Failure. |
| BE33CE6D | DA Microcode Error: Global Data Establish Error. |
| BE33CE6E | DA Microcode Error: Global Data Error Recovery Fence Remote. |
| BE33CE70 | DA Rank Failover/Failback Occurred. |
| BE33CE71 | DA Rank Layout Error. |
| BE33CE72 | Unknown Rank Error. |
| BE33CE73 | DDM Reconstruct Read Occurred. |
| BE33CE76 | Logical Disk Failure. |
| BE33CE7B | One or more logical volumes or repositories has entered into a failed state. |
| BE33CE7E | Device adapter card(s) reported that a storage enclosure DDM failed the secure data overwrite process. |
| BE33CE84 | Device adapter microcode error: Sequence number error (Real). |
| BE33CE85 | Device adapter microcode error: Sequence number error (False). |
| BE33CE88 | Device adapter microcode error: Datapath Error (Real). |
| BE33CE89 | Device adapter microcode error: Datapath Error (False). |
| BE33CE8C | Device adapter microcode error: Data parity (LRC error) error detected. |
| BE33CE8F | Device adapter microcode error: Data parity error (LRC error) detected during generation of data parity (Real). |
| BE33CE90 | Device adapter microcode error: Data parity error (LRC error) detected during generation of data parity (False). |
| BE33CE94 | Device adapter microcode error: Physical address check (Real) due to an R0 Metadata mismatch. |
| BE33CE9B | Device adapter datapath error: Loss of access occurred. Corrective action attempted against last available device adapter of a device adapter pair. |
| BE33CE9C | Device adapter datapath error: Temporary loss of access occurred. Corrective action taken against last available device adapter of a device adapter pair. |
| BE33CEA8 | Device adapter card has encountered a fatal error and has requested a reset. |
| BE33CEC6 | Device adapter microcode error: Loss of access to global data. |
| BE33CEC8 | Device adapter microcode error: PCI configuration write failure. |
| BE33CEC9 | Device adapter microcode error: PCI configuration read failure. |
| BE33CED1 | Device adapter microcode error: Lost heartbeat with partner adapter. |
| BE33CED4 | Device adapter in service mode was fenced due to a service action interrupted by a warmstart. |
| BE33CED6 | Easy Tier volume migration error: migration timeout. |
| BE33CED8 | Informational Message - Customer only notification of rank transitioning into rank rebuild. |
| BE33CED9 | Informational Message - Customer only notification of rank transitioning out of rank rebuild. |
| BE33CEDB | Device adapter resume failed due to warmstart. |
| BE33CEDE | Timeout waiting for remote server to complete stage error recovery. |
| BE33CEDF | Invalid I/O request command to device adapter. |
| BE33CEE3 | Informational Message - Customer only notification that extended disk recovery occurred. System performance may have been impacted. |
| BE33CFE4 | RAID-6 APU protocol error. |
| System reference code | Description |
|---|---|
| BE340000 | Adapter spares or members do not match program expectation. |
| BE340001 | Device adapter cabling error. |
| BE340002 | Fan tray installed but encountered problems or is not installed. |
| BE340003 | Storage enclosure FCAL cabling error detected. |
| BE340004 | Storage Enclosure: at least one DDM missing in slots 1-8. |
| BE340005 | Storage Enclosure: at least one slot is empty (no DDMs or baffles) in slots 9-16. |
| BE340006 | FCAL Cable: Cabling error detected. |
| BE340007 | Fan sense card in unknown state. |
| BE340008 | FCAL cable not connected on the target loop. |
| BE340009 | LPAR device area resource manager detected unexpected objects during IML harvest that have not yet been installed. |
| BE34000B | Actual RPM less than required RPM and/or actual capacity less than required capacity. |
| BE34000C | Duplicate IBM.EssStorageEnclosure objects found. |
| BE34000D | The harvested attribute values for the component are not consistent with the attributes on the associated RM object model. |
| BE34000E | Logical configuration error. |
| BE34000F | DDM certify operation could not be completed due to multiple device adapter resets. |
| BE340010 | Device Area Resource Manager detected objects harvested by the Group Leader Node but not the Peer Node or attribute mismatch between Group Leader and Peer harvested attributes. |
| BE340011 | Device Area Resource Manager detected objects harvested by the Peer Node but not the Group Leader Node. |
| BE340012 | Device Area Resource Manager detected objects missing in the current harvest. |
| BE340013 | Rejected drive found during health check. |
| BE340014 | Bypassed drive found during health check. |
| BE340015 | A POST error was reported. |
| BE340016 | DDM object mismatch detected. |
| BE340017 | Device adapter invalid or corrupt VPD data detected. |
| BE340018 | One or more bypassed drives detected in a storage enclosure. |
| BE340019 | Failed to get device information from Resource Manager. |
| BE34001A | Device adapter cannot see SES disk(s). |
| BE34001B | DDM resume failure. |
| BE34001C | Call home for previously deferred service. |
| BE34001D | Duplicate physicalId (Rx-Syz) detected in ODM. |
| BE34001E | Invalid physical location ID detected in ODM, but a valid physical location ID is reflected in the device area resource manager object model. |
| BE34001F | DDM format complete but initsurf_valid bit not set. |
| BE340020 | Invalid pdisk name detected. |
| BE340021 | Device object mismatch detected in RM object(s). |
| BE340022 | Health check detected a drive with an unknown use. |
| BE340023 | Disk use is invalid. |
| BE340024 | DDM migration failed. |
| BE340025 | Failed drives found during health check. |
| BE340026 | Health check attempted to fail a rejected, bypassed, or unknown DDM, but was unable to determine the locationCode. The DDM may not be fully installed or the DDM object may be missing. |
| BE340027 | Service action detected a bypassed or empty DDM slot and was unable to return it to normal use. |
| BE340028 | Empty slot found by device health check for installed drive not in service. |
| BE340029 | Install or repair detected FCIC or Backplane VPD incoherence. |
| BE34002A | Adapter is not available. |
| BE34002B | Failed to initiate sparing because the dual loop does not contain any valid spares. |
| BE34002C | Sparing operation failed due to microcode error. |
| BE34002D | Sparing was not initiated due to incorrect array state. Array could be in rebuilding or unknown state. |
| BE34002E | Failed to update LPAR device area resource manager. (Possible attribute value mismatch.) |
| BE34002F | LPAR device area resource manager attribute value mismatch detected. |
| BE340030 | Detected a powered-off slot in the I/O tower. |
| BE340031 | LPAR microcode failed to discover device adapter card. |
| BE340032 | LPAR microcode unable to set device adapter card in service mode. |
| BE340033 | LPAR microcode unable to reset device adapter card service mode. |
| BE340034 | Service action detected a non-operational LPAR. |
| BE340035 | DDM firmware update failed due to a system error. |
| BE340036 | Unrecoverable error occurred while updating FCIC card or PSU firmware. |
| BE340037 | Device adapter memory flash card has failed or reached end of life. (Microcode reported error codes are 4060, 4062, or 4063.) |
| BE340038 | Device adapter card has a broken ISP. (Microcode reported error code is 40A0.) |
| BE340039 | Device adapter card detected illegal loop configuration. (Microcode reported error code is 40A4.) |
| BE34003A | Different device adapters types detected on each loop. (Microcode reported error code is 40D0.) |
| BE34003B | Device adapter card detected an unused loop. (Microcode reported error code is 40D4.) |
| BE34003C | Device adapter card detected an unused FC chip. (Microcode reported error code is 40D8.) |
| BE34003D | Device adapter card failed diagnostics. |
| BE34003E | Device adapter card is unavailable and could be fenced or in service mode. |
| BE34003F | Health check detected a device adapter card in service mode for more than 72 hours. Performance may be impacted. |
| BE340040 | Health check found fenced adapter. |
| BE340041 | SES utility reported communication error. |
| BE340042 | The storage enclosure installation process failed to discover at least one enclosure. |
| BE340043 | Dual loop imbalance detected. |
| BE340044 | Service action detected one or more missing Rack ODM object(s). |
| BE340045 | All storage enclosures have duplicate physical IDs (Rx-Syz) and/or have PackID values greater than 5. |
| BE340046 | Duplicate storage enclosure physical IDs (Rx-Syz) detected and at least one enclosure reports good Pack ID. |
| BE340047 | Duplicate storage enclosure physical IDs (Rx-Syz) and/or bad PackID (greater than 5) detected. |
| BE340048 | LPAR microcode failed to configure the device adapter card during a repair or install service action. |
| BE340049 | cpss0 is unavailable. |
| BE34004A | Storage enclosure service action encountered an error while querying ODM. |
| BE34004B | Storage enclosure install failed to enable/disable downstream FCIC card port. |
| BE34004C | The storage enclosure installation process detected a loop error. |
| BE34004D | The storage enclosure installation process detected an invalid drive count. This could be due to missing and/or bypassed drives. |
| BE34004E | The storage enclosure installation process detected at least one downstream trunk cabling error. |
| BE34004F | An error occurred while configuring enclosures and its drives. |
| BE340050 | Device RM or IBM.essSADevicesRM is inactive. |
| BE340051 | The system state is inappropriate for code load. At least one device error count has exceeded its threshold. |
| BE340052 | Failed to format or resume drive because diskCapacity and RPM are invalid. |
| BE340053 | The storage enclosure configuration process detected at least one enclosure with inconsistent FCIC VPDs. The inconsistency could be the result of mismatched VPDs between FCIC cards in the enclosure. |
| BE340054 | Drive was marked for deferred sparing. |
| BE340055 |  Disk class, capacity, or RPM intermix within a storage enclosure or
between a storage enclosure pair. |
| BE340057 | DDM configuration process failed to configure the DDM. |
| BE340058 | Storage enclosure service action detected missing rack ODM object. |
| BE340059 | Detected all storage enclosures with a duplicate physical ID (Rx-Syz). This error can occur due to hung I2C bus. |
| BE34005A | Detected storage enclosures with a duplicate physical ID (Rx-Sxy) and a good pack ID. This error can occur due to hung I2C bus. |
| BE34005B | Detected storage enclosures with duplicate physicalIDs (Rx-Sxy), bad pack IDs, or both. This error could be related to improperly seated enclosure cables that are connected to the fan sense card. |
| BE34005C | LPAR unable to query device adapter resource status during service action. |
| BE34005D | Device adapter service action failed to enable all on-board ports. |
| BE34005E | Storage enclosure code update cannot continue because the DDMs that communicate to FCIC card are unavailable. |
| BE34005F | The storage enclosure installation process detected one or more pre-existing RAID array members. |
| BE340060 | Service action detected a single drive single port active (not present on one loop of the dualLoop). Normally this indicates a problem with the DDM or FCIC. |
| BE340061 | Service action detected a single drive with a disused port (one drive port has been logically bypassed by the adapter). Normally this indicates a problem with the DDM or FCIC. |
| BE340062 | issdiag returned SRC indicating DDM is bad and needs to be replaced. |
| BE340063 | Drive failed diagnostics test. |
| BE340064 | Device Adapter's owning PCI slot is not powered off. |
| BE340065 | Device Adapter's owning PCI slot power status could not be obtained- RTAS call failed or PCI slot is missing from device tree. |
| BE340065 | Device Adapter's owning PCI slot power status could not be obtained- RTAS call failed or PCI slot is missing from device tree. |
| BE340066 | SE install detected an invalid rackID, packLevel, FCIC device, or connector value from the downstream FCIC. The downstream FCIC is included in the FRU list and has location code of the form Rx-Syz-P1-Ca. Reseat this FCIC card and make sure the cabling from this FCIC to the upstream enclosure is also properly seated. Close this service event and attempt install again. If install fails again, either replace the card or call next level of support. |
| BE340067 | FCIC repair or storage enclosure install detected an internal error while updating FCIC firmware. Call the next level of support. |
| BE340068 | FCIC repair or storage enclosure install detected a device adapter not in good state while updating FCIC firmware. Replace FCIC and retry service action. |
| BE340069 | FCIC repair or storage enclosure install failed while downloading FCIC firmware. Replace FCIC and retry service action. |
| BE34006A | FCIC repair or storage enclosure install detected a missing firmware binary. Call next level of support. |
| BE34006B | FCIC repair or storage enclosure install failed during firmware update while calling issraid. Retry service action without replacing parts. |
| BE34006C | FCIC card repair or the storage enclosure installation process failed during firmware download because one or more RAID arrays are not in good state. At least one RAID array may still be rebuilding. |
| BE34006D | FCIC card repair or the storage enclosure installation process failed because one or more FCAL loops are not in good state. |
| BE34006E | FCIC card repair or storage enclosure installation process failed to set FCAL loop in service mode. |
| BE34006F | FCIC card repair or the storage enclosure installation process failed to reset FCAL loop out of service mode. |
| BE340070 | FCIC card firmware download completed successfully, but additional problems were detected. |
| BE340071 | The storage enclosure installation process failed to set FCAL loop in service mode during firmware update. Firmware download has not yet started. |
| BE340072 | FCIC card repair or the storage enclosure installation process detected a storage enclosure in Defined state. |
| BE340073 | DDM could not be deconfigured during sparing operation due to internal microcode error. |
| BE340074 | DDM could not be deconfigured because no spares were available. |
| BE340075 | DDM could not be deconfigured due to a special data situation. |
| BE340076 | DDM could not be deconfigured after multiple retries because device adapter card was reset. |
| BE340077 | Microcode failed to unfence device adapter card during device adapter installation process. |
| BE340078 | Storage enclosure installation process detected a DDM missing from ODM. |
| BE340079 | Storage enclosure installation process detected a DDM bypassed in a storage enclosure on the same FCAL loop. |
| BE340080 | SE install detected at least one bypassed drive on the newly installed enclosure. |
| BE340082 | Storage enclosure installation process failed due to incorrect rackID value detected during FCAL cable check. |
| BE340083 | Storage enclosure installation process failed due to incorrect rackID and packLevel detected during FCAL cable check. |
| BE340084 | This service action cannot proceed until an error on the partner FCAL loop is repaired. |
| BE340085 | FCIC card or FCAL cable replacement failed due to FCAL loop error. |
| BE340086 | FC-AL cable check detected cable problem at a device adapter card. |
| BE340087 | Cable check detected less than two FC-AL loops in Good state. This could be the result of split network condition. There may be a problem with cabling. |
| BE340088 | FC-AL Cable check detected split network condition. There may be a problem with cabling. |
| BE340089 | Service action failed because storage enclosure FCAL loop cross cabling was detected (half of dual loop 1). |
| BE34008A | Service action failed because storage enclosure FCAL loop cross cabling was detected (half of dual loop 2). |
| BE34008B | Service action failed because storage enclosure FCAL loop cross cabling across loops was detected (across dual loops). |
| BE34008C | DA repair was successful but FC-AL cable check detected partner device adapter not seen on the loop. |
| BE34008D | FC-AL cable check found blank output from issmap when enclosures are installed on the daPair. |
| BE34008E | Device adapter card service action did not run FCAL loop checking because repair was run on non-owning LPAR. |
| BE34008F | Device adapter card repair detected an unknown dormant compact flash data. |
| BE340090 | Owning device adapter card was unable to gain access to the DDM to perform diagnostics during storage enclosure install verification process. |
| BE340091 | An unexpected storage enclosure was detected during storage enclosure installation process. |
| BE340092 | Service action failed because both LPARs are not IMLed (cpss0 not available). |
| BE340093 | Service action failed because one of the device adapter cards in a device adapter pair is not available. |
| BE340094 | FCIC card harvest detected invalid FCIC card VPD. |
| BE340095 | Service action has failed because device area resource manager was not operational on both LPARs. |
| BE340096 | The storage enclosure has the invalid rackNumber R16 or R15. The PPS may not be correctly programming the sense card. |
| BE340097 | Storage enclosure has invalid physical ID (Rx-Syz). |
| BE340098 | Error occurred while updating FCIC firmware because SES disks were unavailable or formatting. Try again at a later time. |
| BE340099 | DDM repair failed because the drive is bypassed by the FCIC card microcode. |
| BE34009A | FCAL cable check detected cross connected cables at device adapter card. |
| BE34009B | FCAL cable check detected cross connected cables at an FCIC card. |
| BE34009C | Multiple DDMs are reporting over-temperature alert. Customer room temperature may be greater than 32 degrees C (90 degrees F). |
| BE34009D | DA repair could not verify cabling |
| BE34009E | FDE drive is not cryptographically erased. isscryptoerase utility failed due to software or hardware error. |
| BE34009F | One or more FDE drives are not cryptographically erased. |
| BE3400A0 | DDM Reported Error: Disk class mismatch detected. |
| BE3400A1 | LPAR device area resource manager detected an exception while updating database (system registry) during harvest operation. Database is likely out of sync between LPARs. |
| BE3400A2 | Failed to enroll FDE drive. Encryption groupId is inaccessible. |
| BE3400A3 | Cryptographic erase was not initiated because target drive listed as member or spare. Drive must be in unconfigured state before attempting this action. |
| BE3400A4 | Device adapter card service action failed to reset DA takeover condition in single LPAR operational mode. |
| BE3400A5 | Device adapter card service action failed to reset DA takeover condition in dual LPAR operational mode. |
| BE3400A6 | Service action failed to determine the DDM disk class possibly due to faulty DDM firmware. |
| BE3400A7 | Service action detected a DDM disk class intermix within storage enclosure slot group. |
| BE3400A8 | Service action detected partner storage enclosures with unequal DDM counts. |
| BE3400A9 | Repair detected partner device adapter with one or more FC-AL loops not in Good state so did not verify cabling for partner device adapter. |
| BE3400AA | DDM format operation failed. |
| BE3400AB | The storage enclosure installation process detected at least one FCAL loop error. |
| BE3400AC | Service action detected an intermix of SSD and non-SSD DDMs. |
| BE3400AD | Service action detected an invalid SSD DDM count within a device adapter pair. |
| BE3400AE | Service action detected an intermix of encryption and non-encryption capable DDMs within a storage enclosure slot group. |
| BE3400AF | Service action detected an intermix of encryption and non-encryption capable DDMs within a device adapter pair. |
| BE3400B0 | FCIC card repair detected one or more needed DDMs are unavailable. |
| BE3400B1 | FCIC card repair detected that all needed DDMs are unavailable. |
| BE3400B2 | FCIC repair detected native SES/ESI DDMs are unavailable. |
| BE3400B3 | One or more DDM's are in Security Degraded condition. |
| BE3400B4 | One or more DDMs are in Hard Security Degraded condition. |
| BE3400B5 | DDM install failed because unexpected DDM(s) or slot status was found for storage enclosure slots not being installed. |
| BE3400B6 | Configured encryption group is inaccessible. |
| BE3400B7 | Cannot continue with service action. Replacement drive is a member of an array. |
| BE3400B8 | daDeconfigCryptoEraseFdeDisk utility failed. Disk could not be deconfigured and/or cryptographically erased. |
| BE3400B9 | DA type mismatch detected. |
| BE3400BA | FDE drive could not be cryptographically erased due to internal microcode error. |
| BE3400BB | FDE drive could not be resumed because encryption group state could not be determined. |
| BE3400BC | Detected an invalid DDM capacity. |
| BE3400BD | More than one DDM drive has failed during format or certify. |
| BE3400BE | A failed DDM drive whose state is 9 or 10 was detected during the format or cryptographic erase of arraySite. |
| BE3400BF | issmap/issses command failed during FC-AL cable check. |
| BE3400C0 | Unexpected DDM found in storage enclosure drive slot. |
| BE3400C1 | Storage enclosure repair verification process detected that one or more storage enclosure FRUs were not installed in original locations. |
| BE3400C2 | Storage enclosure backplane repair sys lev verify: cmd issses_checkpost failed after resetting both FCICs. |
| BE3400C3 | At least one storage enclosure component is in bad state. |
| BE3400C4 | DDM SysLevVer, the replacement drive is single port active. |
| BE3400C5 | DDM SysLevVer, the left port for multiple drives are NOT active. |
| BE3400C6 | DDM verification process detected that one of the two ports for multiple DDMs is not available. |
| BE3400C7 | Storage Enclosure: At least one DDM missing in slots 17-24. |
| BE3400C8 | Storage enclosure midplane repair detected an invalid storage enclosure WWNN. |
| BE3400C9 | The service action could not recover an IC port in bad state. This could be due to a bad port or a miscabling. |
| BE3400CA | DDM has exceeded media error thresholds and was failed after a successful smart rebuild with a spare DDM. |
| BE3400CB | DDM has exceeded background media scan threshold (flagged by DA process). |
| BE3400D0 | Midplane System Level Verify: some fields in VPD are not valid. |
| BE3400D1 | The storage installation process failed due to an unsupported DDM intermix condition. |
| BE3400F3 | Device adapter repair failed, service action failed to reset disabled resources on partner adapter. |
| BE3400F6 | The storage enclosure installation process detected a member drive that belongs to a legitimate RAID array. |
| BE340106 | The service action failed to deactivate the target FRU. |
| BE340113 |
LPAR health check is not running as frequently as expected. |
| BE344440 | Storage enclosure has a single port active. |
| BE346018 | Proactive slow disk notification. |
| BE34CA11 | Problem Analysis could not completely diagnose a Device Area failure. A FRU was not isolated. System state saves have been forced. |
| BE34CE12 | Bypassed and failed a drive based on 0xCE12 invocation and error threshold count (attempt to bypass a drive before it fences alt DA). |
| System reference code | Description |
|---|---|
| BE35250D | An EEH Event On This IOA Slot Has Been Detected |
| BE35250E | EEH Event Caused by IOA Asserting SERR |
| BE35250F | EEH Event Caused by Host MMIO RAM Error |
| BE352510 | EEH Event Caused by EadsX Detecting Bad Parity on PHB |
| BE352511 | EEH Event Caused by EadsX Detecting Bad Parity on IOA bus |
| BE352512 | EEH Event Caused by EadsX Master Aborted by PHB |
| BE352513 | EEH Event Caused by EadsX Master Aborted by IOA |
| BE352514 | EEH Event Caused by EadsX Target Aborted by PHB |
| BE352515 | EEH Event Caused by EadsX Target Aborted by IOA |
| BE352516 | EEH Event Caused by EadsX Destination Bus Was Reset |
| BE352517 | EEH Event Caused by EadsX Detecting Bad Write Data Parity on PHB bus |
| BE352518 | EEH Event Caused by EadsX Detecting Bad Write Data Parity on IOA bus |
| BE352519 | EEH Event Caused by EadsX Discarding Delayed Completion Operation because IOA Did Not Retry the Operation in Time |
| BE35251A | EEH Event Caused by EadsX Discarding Delayed Completion Operation because PHB Did Not Retry the Operation in Time |
| BE35251B | EEH Event Caused by an EadsX Master Bus Timeout on IOA Bus |
| BE35251C | EEH Event Caused by an EadsX Time Out Waiting for PHB to Return Split Completion Operation |
| BE35251D | EEH Event Caused by an EadsX Time Out Waiting for IOA to Return Split Completion Operation |
| BE35251E | EEH Event Caused by EadsX Received Split Completion Message From PHB |
| BE35251F | EEH Event Caused by EadsX Received Split Completion Message From IOA |
| BE352520 | EEH Event Caused by EadsX Received Master/Target Abort From PHB When It tried to return a Split Completion. |
| BE352521 | EEH Event Caused by EadsX Received Master/Target Abort From IOA Or IOA Bus Was Reset When EadsX tried to return a Split Completion. |
| BE352522 | EEH event was caused by EadsX entering freeze state for an unknown reason. |
| BE352600 | Host Adapter Error During Service Mode |
| BE352601 | Host Adapter Interrupt With NO DATA Error |
| BE352602 | Host Adapter EIR LRC Check |
| BE352603 | Host Adapter Message LRC Failure |
| BE352604 | Host Adapter Invalid Message Failure |
| BE352605 | Host Adapter Control Message Failure |
| BE352606 | Host Adapter Data CRC Check |
| BE352607 | Host Adapter Data CRC Check and Cache Check |
| BE352608 | Host Adapter Data LRC Check |
| BE352609 | Host Adapter Data LRC Check and Cache Check |
| BE35260A | Host Adapter SCSI SeqNum Error First Event |
| BE35260B | Host Adapter SCSI SeqNum Error and Cache LRC |
| BE35260C | Second occurrence of customer data sequence number error |
| BE35260D | Host Adapter Header LRC Check |
| BE35260E | Host Adapter Header LRC Check and Cache Check |
| BE35260F | Host Adapter Header PA bad CRC |
| BE352610 | Host Adapter Header PA bad CRC and Cache Check |
| BE352611 | Second occurrence of customer data physical address error |
| BE352612 | Host Adapter Error: Invalid Record Sector |
| BE352613 | Host Adapter Error: Invalid Record Sector and Cache Check |
| BE352614 | Host Adapter: SCSI Abort Task |
| BE352615 | Host Adapter: SCSI Abort Task Set |
| BE352616 | Host Adapter: SCSI Clear Task Set |
| BE352617 | Host Adapter: SCSI LUN Reset |
| BE352618 | Host Adapter: SCSI Target Reset |
| BE352619 | Host Adapter HA Trace Log |
| BE35261A | Host Adapter HA Abort Log Reported |
| BE35261B | Host Adapter HA Logical Table Mismatch |
| BE35261C | Host Adapter Host Log: Abort Task |
| BE35261D | Host Adapter Host Log: Check Condition |
| BE35261E | Host Adapter Host Logging Enabled |
| BE35261F | Host Adapter Host Logging Disabled |
| BE352620 | Host Adapter Host Log: Task Timeout |
| BE352621 | Host Adapter Fixed Block MLE |
| BE352622 | Host Adapter Adapter Error: Panic |
| BE352623 | Host Adapter ODM Failure - cpss0 CuDv |
| BE352624 | Host Adapter ODM Failure - odmget CuDv parent |
| BE352625 | Host Adapter ODM Failure - CuDv bad state |
| BE352626 | Host Adapter ODM Failure - CuDv odmget |
| BE352627 | Host Adapter ODM Failure - no CuDv |
| BE352628 | Host Adapter ODM Failure - no CuDv parent |
| BE352629 | Host Adapter ODM Failure on odmget |
| BE35262A | Host Adapter ODM Failure on odminit |
| BE35262B | Host Adapter ODM Initialization Failure |
| BE35262C | Host Adapter ODM Options Error |
| BE35262D | Host Adapter ODM Failure on CuAt close |
| BE35262E | Host Adapter ODM Failure on CuDv close |
| BE35262F | Host Adapter ODM Failure on CuVPD close |
| BE352630 | Host Adapter ODM Failure on CuAt open |
| BE352631 | Host Adapter ODM Failure on CuDv open |
| BE352632 | Host Adapter ODM Failure on CuDv open |
| BE352633 | Host Adapter ODM Failure on CuVPD open |
| BE352634 | Host Adapter ODM Failure on CuAt remove |
| BE352635 | Host Adapter ODM Failure on CuDv remove |
| BE352636 | Host Adapter ODM Failure on CuVPD remove |
| BE352637 | Host Adapter ODM Failure on Storage Map remove |
| BE352638 | Host Adapter ODM Failure on Bus Behavior Table |
| BE352639 | Host Adapter ODM Failure on Storage Map Get |
| BE35263A | Host Adapter ODM Failure on Storage Map Get |
| BE35263B | Host Adapter ODM Failure on Code Read |
| BE35263C | Host Adapter ODM Failure on Flash Read |
| BE35263D | Host Adapter ODM Failure on ODM Update |
| BE35263E | Host Adapter ODM Failure on ODM Update |
| BE35263F | Host Adapter ODM Failure - Location Already Configured |
| BE352640 | Host Adapter ODM Failure - Port CuDv not found |
| BE352641 | Host Adapter ODM Failure - No CuDv |
| BE352642 | Host Adapter ODM Failure - No cpss0 entry in CuDv |
| BE352643 | Host Adapter ODM Failure - No CuDv Info |
| BE352644 | Host Adapter ODM Failure - No CuDv Parent |
| BE352645 | Host Adapter ODM Failure - No Logical Name |
| BE352646 | Host Adapter ODM Failure - No PdDv |
| BE352647 | Host Adapter ODM Failure - Storage Map Operation Failure |
| BE352648 | Host Adapter ODM Failure - Open cpssdd Failure |
| BE352649 | Host Adapter ODM Failure - Options Failure |
| BE35264A | Host Adapter Fence Logical Path |
| BE35264B | Host Adapter Link Incident - BER Exceeded |
| BE35264C | Host Adapter Link Incident - LIR Reported |
| BE35264D | Host Adapter Link Incident - no LIR reported |
| BE35264E | Host Adapter ECC Correctable Error Detected |
| BE35264F | Host Adapter ECC Uncorrectable Error Detected |
| BE352650 | Host Adapter Formatter Error |
| BE352651 | Host Adapter Service Config/Unconfig Failure |
| BE352652 | Host Adapter Config Fail: ADS Null |
| BE352653 | Host Adapter Config Failure: Boot Failure |
| BE352654 | Host Adapter Config Fail: Flash Miscompare |
| BE352655 | Host Adapter Config Fail: Burn Flash Failure |
| BE352656 | Host Adapter Config Fail: Config Checksum |
| BE352657 | Host Adapter Config: CMNGS Update Timeout |
| BE352658 | Microcode failed to configure host adapter card. |
| BE352659 | Host Adapter Config Fail: Device ID Incorrect |
| BE35265A | Host Adapter Config Fail: Early IML Complete |
| BE35265B | Host Adapter Config Failure: POST Failure |
| BE35265C | Host Adapter Config Fail: Config Ready Fail |
| BE35265D | Host Adapter Config Failure: CUB Timeout |
| BE35265E | Host Adapter Config CMNADPGS Read Failure |
| BE35265F | Host Adapter Config SMPVISIBLE Read Failure |
| BE352660 | Host Adapter Config Fail: TCB Allocate Failed |
| BE352661 | Host Adapter Config Fail: SREC Missing |
| BE352662 | Host Adapter Global CRC Error |
| BE352663 | Host Adapter SMP Detected HW Failure |
| BE352664 | Host Adapter Microcode Detected HW Failure |
| BE352665 | Fibre Channel IOCB Response Hardware Failure |
| BE352666 | Fibre Channel Mailbox Response Hardware Failure |
| BE352667 | Fibre Channel Host Adapter: Adapter PCI Error |
| BE352668 | Fibre Channel Host Adapter: Hang Timer for adapter PCI |
| BE352669 | Fibre Channel Host Adapter: Adapter PCI SERR Interrupt |
| BE35266A | Fibre Channel Host Adapter: Interrupt Controller Reserved Bit Error |
| BE35266B | Fibre Channel Host Adapter: Clock Error |
| BE35266C | Fibre Channel Host Adapter: DMA1 Error |
| BE35266D | Fibre Channel Host Adapter: DMA2 Error |
| BE35266E | Fibre Channel Host Adapter: ELA Error |
| BE35266F | Fibre Channel Multiple Port Failure |
| BE352670 | Fibre Channel Single Port Failure |
| BE352671 | Fibre Channel Interrupt Controller Summary With Invalid Data |
| BE352672 | Fibre Channel Interrupt Controller Summary Active |
| BE352673 | Fibre Channel Host Adapter L3 Cache Check |
| BE352674 | Fibre Channel Host Adapter Local PCI Error |
| BE352675 | Fibre Channel Local PCI Error |
| BE352676 | Fibre Channel Host Adapter PBUS Summary Interrupt |
| BE352677 | Fibre Channel PowerPC Exception |
| BE352678 | Fibre Channel Host Adapter SBM Error |
| BE352679 | Fibre Channel Adapter PCI Error |
| BE35267A | Fibre Channel Adapter PCIA Error Interrupt |
| BE35267B | Fibre Channel Clock Error |
| BE35267C | Fibre Channel DMA1 Error |
| BE35267D | Fibre Channel ELA Interrupt |
| BE35267E | Fibre Channel HAMER Error |
| BE35267F | Fibre Channel Host Adapter Hang Timer Interrupt |
| BE352680 | Fibre Channel L3 Cache Check |
| BE352681 | Fibre Channel Local PCI SERR |
| BE352682 | Fibre Channel Local PCIA Error |
| BE352683 | Fibre Channel PBUS Check |
| BE352684 | Fibre Channel Reserved Field Failure |
| BE352685 | Fibre Channel SBM Error Interrupt |
| BE352686 | Host Adapter PowerPC Alignment Error |
| BE352687 | Host Adapter PowerPC Breakpoint Error |
| BE352688 | Host Adapter PowerPC DSI |
| BE352689 | Host Adapter PowerPC Machine Check |
| BE35268A | Host Adapter PowerPC Program Exception |
| BE35268B | Host Adapter PowerPC Floating Point Exception |
| BE35268C | Host Adapter PowerPC Hang Timer Exception |
| BE35268D | Host Adapter PowerPC Instruction Storage Interrupt |
| BE35268E | Host Adapter PowerPC No Data Exception |
| BE35268F | Host Adapter PowerPC Performance Exception |
| BE352690 | Host Adapter PowerPC System Reset |
| BE352691 | Host Adapter PowerPC System Management Interrupt |
| BE352692 | Host Adapter PowerPC System Call Exception |
| BE352693 | Host Adapter PowerPC Thermal Management Interrupt |
| BE352694 | Host Adapter PowerPC Trace Exception |
| BE352695 | Host Adapter PowerPC Machine Check |
| BE352696 | Host Adapter PowerPC Other Exception |
| BE352697 | Host Adapter MPC107 Error |
| BE352698 | Host Adapter MPC107 PCI SERR |
| BE352699 | Host Adapter MPC107 PCI Target PERR |
| BE35269A | Host Adapter MPC107 Memory Read Parity Error |
| BE35269B | Host Adapter MPC107 Flash ROM Write Error |
| BE35269C | Host Adapter MPC107 L2 Copyback Error |
| BE35269D | Host Adapter MPC107 Unknown SRR1 Error |
| BE35269E | Host Adapter MPC107 Interrupt |
| BE35269F | Host Adapter Interrupt Controller No Data |
| BE3526A0 | Host Adapter Interrupt Controller Hang Timer |
| BE3526A1 | Host Adapter Interrupt Controller Reserved Bit Error |
| BE3526A2 | Host Adapter Interrupt Controller HA PCI SERR |
| BE3526A3 | Host Adapter Interrupt Controller Arbiter Error |
| BE3526A4 | Host Adapter Interrupt Controller 60X Bus Address Parity Check |
| BE3526A5 | Host Adapter Interrupt Controller 60X Bus Data Parity Check |
| BE3526A6 | Host Adapter Interrupt Controller Protected Address Write Error |
| BE3526A7 | Host Adapter Interrupt Controller PCIA Error |
| BE3526A8 | Host Adapter Interrupt Controller SBM Interrupt |
| BE3526A9 | Host Adapter Interrupt Controller Formatter Error |
| BE3526AA | Host Adapter Interrupt Controller 60X Bus Error |
| BE3526AB | Host Adapter MM4SC Interrupt |
| BE3526AC | Host Adapter SBM Write Parity Error (FC PCI) |
| BE3526AD | Host Adapter SBM Read Parity Error (FC PCI) |
| BE3526AE | Host Adapter SBM Read/Write Parity Error (FC PCI) |
| BE3526AF | Host Adapter SBM Uncorrectable ECC Error (FC PCI) |
| BE3526B0 | Host Adapter SBM Multiple Error (FC PCI) |
| BE3526B1 | Host Adapter SBM Write Parity Error (FMT PCI) |
| BE3526B2 | Host Adapter SBM Read Parity Error (FMT PCI) |
| BE3526B3 | Host Adapter SBM Read/Write Parity Error (FMT PCI) |
| BE3526B4 | Host Adapter SBM Uncorrectable ECC Error (FMT PCI) |
| BE3526B5 | Host Adapter SBM Multiple Error (FMT PCI) |
| BE3526B6 | Host Adapter SBM Write Parity Error (LP PCI) |
| BE3526B7 | Host Adapter SBM Read Parity Error (LP PCI) |
| BE3526B8 | Host Adapter SBM Read/Write Parity Error (LP PCI) |
| BE3526B9 | Host Adapter SBM Uncorrectable ECC Error (LP PCI) |
| BE3526BA | Host Adapter SBM Multiple Error (LP PCI) |
| BE3526BB | Host Adapter SBM Address Check |
| BE3526BC | Host Adapter SBM Soft Error Threshold Check |
| BE3526BD | Host Adapter SBM Unimplemented Memory Error |
| BE3526BE | Host Adapter PCIA LP PMAC Received Target Abort |
| BE3526BF | Host Adapter PCIA FC PMAC Issued Master Abort |
| BE3526C0 | Host Adapter PCIA LP Memory Region Overlap Error |
| BE3526C1 | Host Adapter PCIA FC PMAC Received Target Abort |
| BE3526C2 | Host Adapter PCIA HA PMAC Issued Master Abort |
| BE3526C3 | Host Adapter PCIA FC Memory Region Overlap Error |
| BE3526C4 | Host Adapter PCIA HA ICR Read/Write Timeout |
| BE3526C5 | Host Adapter PCIA HA PMAC Received Target Abort |
| BE3526C6 | Host Adapter PCIA LP PMAC Issued Master Abort |
| BE3526C7 | Host Adapter PCIA HA Memory Region Overlap Error |
| BE3526C8 | Host Adapter PCIA LP ICR Read/Write Timeout |
| BE3526C9 | First flash image boot failure |
| BE3526CA | EADS Interface Read/Write failure |
| BE3526CB | BIST failure |
| BE3526CC | Flash burn AB word miscompare |
| BE3526CD | Bootstrap loader failure |
| BE3526CE | Fibre Channel port wraptest failure |
| BE3526CF | IOA Slot Freeze Failure during config |
| BE3526D0 | DMA Codeload failure |
| BE3526D1 | Fabric event blames IOA adapter |
| BE3526D2 | Adapter caused too many fabric faults |
| BE3526D3 | Interrupt seen but no EIR presented |
| BE3526D4 | Adapter communication timeout |
| BE3526D5 | Adapter missed a heartbeat |
| BE3526D6 | Host Adapter HA Trace Log (DMA Error Primary) |
| BE3526D7 | Host Adapter HA Trace Log (DMA Error Secondary) |
| BE3526D8 | Host Adapter DMA Timeout |
| BE3526D9 | Host Adapter Microcode Detected HW Failure |
| BE3526DA | Fibre Channel IOCB Status Error |
| BE3526DB | Fibre Channel Mailbox Error |
| BE3526DC | Fibre Channel Diagnostic Failure |
| BE3526DD | Fibre Channel Illegal Parameter Error |
| BE3526DE | Fibre Channel Mailbox Timeout |
| BE3526DF | Fibre Channel IOCB Not Ready Error |
| BE3526E0 | Fibre Channel IOCB Timeout |
| BE3526E1 | Fibre Channel Unexpected Error |
| BE3526E2 | Host Adapter Interrupt Uninstallation Failure |
| BE3526E3 | Host Adapter Interrupt Unregistration Failure |
| BE3526E4 | Host Adapter EADS-X Related Configuration Failure |
| BE3526E5 | Host Adapter Fibre Channel Link Log |
| BE3526E6 | Host Adapter Causing Too Many Indeterminite PHYP Fabric Faults |
| BE3526E7 | Fibre Channel Reset |
| BE3526E8 | Host Adapter Data Loss Event |
| BE3526E9 | Host Adapter Config Fail: Adapter Failed To Become Available |
| BE3526EA | Host Adapter Config Fail: Configuration Failed to Create PCI Windows |
| BE3526EB | Host Adapter PCI Write Failure (Config Space) |
| BE3526EC | Host Adapter PCI Read Failure (Config Space) |
| BE3526ED | Host Adapter Fibre Channel ODM Topology Failure |
| BE3526EE | Host adapter access of unconfigured LUN. |
| BE3526F8 | More than one host adapter encountered a global CRC error. |
| BE3526F9 | More than one host adapter encountered a header LRC error. |
| BE3526FC | Host adapter one shot panic ODD dump. |
| System reference code | Description |
|---|---|
| BE360010 | LPAR host adapter resource manager detected host adapter attribute values mismatched between LPARs. |
| BE360011 | LPAR host adapter resource manager detected HA(or I/O) Port topology attribute values mismatched in ODM between LPARs. |
| BE360012 | IBM.EssSAHARM detected objects missing in the current harvest. |
| BE360013 | IBM.EssSAHARM detected that the user has specified an invalid I/O port topology. Valid values are 0 (Undefined), 1 (FCP), 2 (FCAL), 3 (FICON). |
| BE360014 | Host adapter's CCIN and/or part number value is invalid. |
| BE360015 | Change I/O port topology service action failed because of invalid resource state. The host adapter or target I/O port is not in an available state. |
| BE360016 | LPAR host adapter resource manager object model update failed. |
| BE360100 | Custom Host Adapter error used by PFE group. |
| BE362600 | Bit error rate test failure. |
| BE362601 | Wrap test failure. |
| BE362602 | Host adapter card service action failed due to host adapter CCIN mismatch. |
| BE362603 | Host adapter's owning PCI slot is powered off. |
| BE362604 | Host adapter card could not be discovered/configured. |
| BE362605 | Unable to query PCI slot's power status failed after one or more retries. |
| BE362606 | Health check process detected a host adapter in service mode for more than 72 hours. |
| BE362607 | Health check found fenced host adapter. |
| BE362608 | Health check found one or more fenced I/O ports. |
| BE362609 | Health check found one or more offline I/O ports. |
| BE36260A | Host Adapter's owning PCI slot is not powered off. |
| BE36260B | Host Adapter's owning PCI slot power status could not be obtained - RTAS call failed or PCI slot is missing from device tree. |
| BE36260C | Microcode failed to set service mode on the card during the host adapter install process. |
| System reference code | Description |
|---|---|
| BE370000 | I/O Adapter PCI slot is not powered on. |
| BE370001 | I/O Adapter PCI slot is not powered off. |
| BE370002 | I/O Adapter PCI slot power status could not be obtained. - RTAS call failed or PCI slot is missing from device tree. |
| BE370003 | I/O Adapter could not be discovered and/or configured. |
| BE370004 | I/O tower is not found in device tree as expected. |
| BE370005 | Microcode failed to bring I/O bay enclosure online during install MES operation. |
| BE370010 | IBM.essServerRM detected objects harvested by the Group Leader Node but not the Peer Node or attribute mismatch between Group Leader and Peer harvested attributes. |
| BE370011 | IBM.essServerRM detected objects harvested by the Peer Node but not the Group Leader Node. |
| BE370012 | I/O tower was not found by IBM.essServerRM harvest method after IML (bay is missing) |
| BE3700A1 | LPAR server resource manager(IBM.essServerRM) detected an exception while updating database (system registry) during harvest operation. Database is likely out of sync between LPARs. |
| System reference code | Description |
|---|---|
| BE382505 | Previous PCIe Fabric Error Has Been Recovered. |
| BE38250C | No path through the PCIe fabric exists to this I/O enclosure. |
| BE382560 | CEC P5IOCv2 PHB slot error. |
| BE382561 | CEC 8612 PCIe switch error. |
| BE382562 | I/Oenclosure 8648 PCIe switch error. |
| BE382563 | Degraded PCIe link(s) detected. |
| BE382564 | Unisolated I/Oenclosure fabric event. |
| BE382565 | I/O Adapter caused a fabric error. |
| BE382566 | PCIe I/Oenclosure discovery/configuration failure. |
| BE382567 | PCIe I/Oenclosure discovery/configuration failure: invalid server configuration. |
| BE382568 | PCIe I/Oenclosure discovery/configuration failure: EEH RTAS call failed. |
| BE382569 | PCIe I/Oenclosure discovery/configuration failure: Could not transition slot EEH state to normal. |
| BE38256A | PCIe I/Oenclosure discovery/configuration failure: Local server hardware failure. |
| BE38256B | PCIe I/Oenclosure discovery/configuration failure: Could not initialize path from local server to bay. |
| BE38256C | FPGA update image corrupted on local server. |
| BE38256D | PCIe I/Oenclosure FPGA error. |
| BE38256E | PCIe I/Oenclosure MTMS unknown/invalid. |
| BE38256F | PCIe I/Oenclosure miscable detected. |
| BE382570 | PCIe hub failure detected during discovery/configuration. |
| BE382571 | Error occurred during CEC error data collection. |
| BE382572 | Error occurred during I/O enclosure error data collection. |
| BE382573 | Error occurred during I/O Adapter error data collection. |
| BE382574 | One CEC cannot reach the I/O enclosure. A system failover is required. |
| BE382575 | PCIe I/O Enclosure discovery/configuration failure: I/O Enclosure missing. |
| BE382577 | Error occurred during resource delay reset/delay fence: Escalating to reset/fence. |
| BE382579 | Error occurred trying to take ownership of PCIe I/O enclosure. |
| BE38257A | PCIe Fundamental Reset asserted on I/O enclosure slot. |
| BE38257B | Link to PCIe I/O Enclosure down. |
| BE38257C | RIO Hub Card is garded. |
| BE38257E | Error occurred trying to take ownership of I/O Enclosure after port swap is successful. |
| BE382580 | Host adapter discovery/configuration failure: Fibre Channel Host Card 8Gb plugged into wrong slot. |
| BE382581 | Host adapter discovery/configuration failure: The rack does not support the I/O enclosure Fibre Channel 4Gb host card. |
| BE382582 | Device adapter discovery/configuration failure: The rack does not support the I/O enclosure copper device adapter card. |
| BE382583 | Device adapter discovery/configuration failure: The rack does not support the I/O enclosure optical device adapter card. |
| BE382584 | A Fibre Channel Host card was discovered in the slot that does not support it, is not the type expected, or it does not match the card it is replacing. |
| BE382588 | Page fault escalated to PCIe I/O enclosure as target address is not in this server's window. |
| BE382589 | Interrupt stuck error detected in PCIe Bay. |
| BE3825A0 | PCIe I/O enclosure discovery/configuration failure: Could not initialize path from local server to bay, due to PCIe switch failure. |
| BE3825A1 | PCIe I/O enclosure error. |
| System Reference Code | Description |
|---|---|
| BE392800 | Host adapter ASIC data formatter engine error. |
| BE392801 | Error occurred with unused host adapter ASIC hardware. |
| BE392802 | Host adapter ASIC primary PCIe bus error. |
| BE392803 | Host adapter ASIC primary PCIe bus Class B recoverable error. |
| BE392804 | Host adapter ASIC functional island error. |
| BE392805 | MSI occurred from PCIe local bus 1. |
| BE392806 | MSI occurred from PCIe local bus 2. |
| BE392807 | MSI occurred from PCIe local bus 3. |
| BE392808 | Error occurred affecting Fibre Channel port 0 |
| BE392809 | Error occurred affecting Fibre Channel port 1. |
| BE39280A | Error occurred affecting Fibre Channel port 0 and 1. |
| BE39280B | Error occurred affecting Fibre Channel port 2. |
| BE39280C | Error occurred affecting Fibre Channel port 3. |
| BE39280D | Error occurred affecting Fibre Channel port 2 and 3. |
| BE39280E | Error occurred affecting Fibre Channel port 4. |
| BE39280F | Error occurred affecting Fibre Channel port 5. |
| BE392810 | Error occurred affecting Fibre Channel port 6. |
| BE392811 | Error occurred affecting Fibre Channel port 7. |
| BE392812 | Error occurred affecting Fibre Channel port 4, 5, 6, 7 and the PCIe switch. |
| BE392813 | Error occurred affecting PCIe switch. |
| BE392814 | Host adapter ASIC SBM function error. |
| BE392815 | Host adapter processor SDRAM error. |
| BE392816 | Default host adapter Class A event. |
| BE392817 | Non IBM supported host adapter SFP detected. |
| BE392818 | Non IBM supported host adapter SFP replaced with supported SFP. |
| BE392819 | Host adapter ASIC primary PCIe bus error indicates a possible fabric fault. |
| BE39281B | Host adapter local bus 1 PCIe recovered Class B error. |
| BE39281C | Host adapter local bus 2 PCIe recovered Class B error. |
| BE39281D | Host adapter local bus 3 PCIe recovered Class B error |
| BE392820 | Error occurred from host adapter processor PCIe bus. |
| BE392821 | Internal error occurred from Host adapter processor. |
| BE392822 | Host adapter failsafe panic. |
| BE392824 | Unable to reconfigure host adapter PCIe bus. |
| BE392829 | T10 DIF CRC error on write operation. |
| BE392830 | T10 DIF CRC error on read operation in single host adapter. |
| BE392831 | T10 DIF CRC error on read operation in multiple host adapter. |
| BE392833 | T10 DIF REF error on write operation. |
| BE392834 | T10 DIF REF error on read operation in single host adapter. |
| BE392835 | T10 DIF REF error on read operation in multiple host adapter. |
| BE392840 | Host adapter panic occurred. |