DS8000 Service Documentation Version 6.3.3

MEMDIMM

The failing component is one of the memory DIMMs.

Before you begin

Note: Storage complex repair actions must always be managed from the management console. To replace any FRUs identified in this procedure, use Storage Facility Management > storage facility > Exchange Parts. If the FRUs are listed in this or another Serviceable Event, select them from there.

Procedure

Replace the FRUs in the order shown until the problem is resolved.

Table 1. Replacing the failing part
Unit	Failing part	How to replace the failing part
CEC enclosure - Processor 1	DIMM 1 P2-C1-C1 DIMM 2 P2-C1-C2 DIMM 3 P2-C1-C3 DIMM 4 P2-C1-C4 DIMM 5 P2-C1-C5 DIMM 5 P2-C1-C5 DIMM 6 P2-C1-C6 DIMM 7 P2-C1-C7 DIMM 8 P2-C1-C8 DIMM 9 P2-C1-C9 DIMM 10 P2-C1-C10 DIMM 11 P2-C1-C11 DIMM 12 P2-C1-C12	Refer to Exchanging parts.
CEC enclosure - Processor 2	DIMM 1 P2-C2-C1 DIMM 2 P2-C2-C2 DIMM 3 P2-C2-C3 DIMM 4 P2-C2-C4 DIMM 5 P2-C2-C5 DIMM 6 P2-C2-C6 DIMM 7 P2-C2-C7 DIMM 8 P2-C2-C8 DIMM 9 P2-C1-C9 DIMM 10 P2-C1-C10 DIMM 11 P2-C1-C11 DIMM 12 P2-C1-C12	Refer to Exchanging parts.

This ends the procedure.