DS8000 Service Documentation Version 6.3.3

FSPSP46

Some corrupt areas of flash or RAM have been detected on the service processor.

Before you begin

Note: Storage complex repair actions must always be managed from the management console. To replace any FRUs identified in this procedure, use Storage Facility Management > storage facility > Exchange Parts. If the FRUs are listed in this or another Serviceable Event, select them from there.

Procedure

  1. Replace the CEC enclosure service processor card at Un-P1-C11.
  2. Perform a slow boot. See MAP4820 Performing a slow boot of a CEC enclosure.