DS8000 Service Documentation Version 6.3.3

FC-AL cables, copper, connecting after FCIC card replacement

This topic describes how to connect the FC-AL cables.

Before you begin

This is not a standalone procedure. It is the second part of the FCIC card parts exchange procedure to connect the FC-AL cables after the FCIC card has been powered on.

Procedure

  1. Connect the FC-AL cables to the FCIC card as shown in the following figure. Use the location code labels on each cable to ensure it is properly connected.
    Figure 1. FCIC card cables
    Storage enclosure 1
  2. Exit this service information center parts exchange procedure and return to the procedure that sent you here.
Related tasks:
How to start the service information center