DS8000 Service Documentation Version 6.3.3

Disconnecting the internal Ethernet cables to the management console in the storage facility being installed

Procedure

  1. Locate the Ethernet switches in the rear of the Rack-1 that is being installed.
    Figure 1. 8-port Ethernet switch port designations (SW1, SW2-Tx) Model 941 and 951
    8-port Ethernet switch port designations (SW1, SW2-Tx)
  2. Disconnect the management console Ethernet cable (black end) that plugs into the Ethernet switch (SW1) connector T1.
    Note: This cable will be reconnected in a later step.
  3. Disconnect the management console Ethernet cable (gray end) that plugs into the Ethernet switch (SW2) connector T1.
    Note: This cable will be reconnected in a later step.
  4. Does the storage facility to be installed have one or more storage expansion racks?